5秒后页面跳转
MAX1819EVKIT PDF预览

MAX1819EVKIT

更新时间: 2024-11-05 23:45:51
品牌 Logo 应用领域
美信 - MAXIM /
页数 文件大小 规格书
3页 93K
描述
Evaluation Kit for the MAX1819EBL18

MAX1819EVKIT 数据手册

 浏览型号MAX1819EVKIT的Datasheet PDF文件第2页浏览型号MAX1819EVKIT的Datasheet PDF文件第3页 
19-2341; Rev 0; 2/02  
MAX1819 Evaluation Kit  
General Description  
The MAX1819 linear regulator evaluation kit (EV kit) pro-  
vides a regulated 1.8V output voltage from a 2.5V to 5.5V  
input source. It delivers up to 500mA output current.  
Features  
2.5V to 5.5V Input Voltage Range  
Up to 500mA Output Current  
Output Voltage  
The EV kit is a fully assembled and tested surface-mount  
PC board. It can also evaluate other output voltages in  
the 1.25V to 5.0V range by using external resistors.  
1.8V Fixed Output Voltage (MAX1819EBL18)  
1.25V to 5.0V Adjustable Output Voltage  
(External Divider)  
Power-OK Output  
6-Bump UCSP Package  
Surface-Mount Construction  
Fully Assembled and Tested  
Component List  
DESIGNATION QTY  
DESCRIPTION  
1µF 10%, 10V X7R ceramic  
capacitor (0805)  
Taiyo Yuden LMK212BJ105KG or  
Murata GRM40X7R105K010AD  
Ordering Information  
C1  
C2  
1
1
PART  
TEMP RANGE  
IC PACKAGE  
MAX1819EVKIT  
0°C to +70°C  
6 UCSP  
Note: To evaluate the MAX1819EBL15/20/25/33/50, use  
external feedback resistors.  
4.7µF 20%, 6.3V X5R ceramic  
capacitor (0805)  
Taiyo Yuden JMK212BJ475MG or  
TDK C2012X5R0J475M  
Quick Start  
The MAX1819 EV kit is fully assembled and tested.  
Follow these steps to verify board operation.  
JU1  
R1  
1
0
3-pin header  
Not installed (0603)  
Not installed, pads shorted with PC  
trace (0603)  
Do not turn on the power supply until all connec-  
tions are completed:  
R2  
R3  
U1  
0
1
1
100k5% resistor (0603)  
1) Verify that the shunt is across pins 1 and 2 of  
jumper JU1 (SHDN) (Table 1).  
MAX1819EBL18 (6-bump UCSP)  
Top mark AAG  
2) Connect a voltmeter to the VOUT pad. Connect the  
ground to the GND pad closest to VOUT.  
None  
None  
None  
None  
1
1
1
1
Shunt  
MAX1819 PC board  
MAX1819EVKIT data sheet  
MAX1819 data sheet  
3) Connect a 2.5V to 5.5V supply to the VIN pad.  
Connect the supply ground to the GND pad closest  
to VIN.  
4) Turn on the power supply and verify that the output  
is the preset voltage of 1.8V.  
To evaluate other voltages, see the Evaluating Other  
Output Voltages section.  
Component Suppliers  
SUPPLIER  
PHONE  
FAX  
WEBSITE  
www.murata.com  
Murata  
770-436-1300  
800-348-2496  
847-803-6100  
770-436-3030  
847-925-0899  
847-390-4405  
Taiyo Yuden  
TDK  
www.t-yuden.com  
www.component.tdk.com  
Note: Please indicate that you are using the MAX1819 when contacting these component suppliers.  
________________________________________________________________ Maxim Integrated Products  
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at  
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.  

与MAX1819EVKIT相关器件

型号 品牌 获取价格 描述 数据表
MAX181ACPL MAXIM

获取价格

Complete, 8-Channel, 12-Bit Data-Acquisition Systems
MAX181ACPL ROCHESTER

获取价格

8-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PDIP40, PLASTIC, DIP-40
MAX181ACQH MAXIM

获取价格

Complete, 8-Channel, 12-Bit Data-Acquisition Systems
MAX181ACQL MAXIM

获取价格

Single-Ended Data Acquisition System
MAX181AEPL MAXIM

获取价格

Complete, 8-Channel, 12-Bit Data-Acquisition Systems
MAX181AEQH MAXIM

获取价格

Complete, 8-Channel, 12-Bit Data-Acquisition Systems
MAX181AEQH+D MAXIM

获取价格

ADC, Successive Approximation, 12-Bit, 1 Func, 8 Channel, Parallel, Word Access, PQCC44, P
MAX181AEQH-D MAXIM

获取价格

ADC, Successive Approximation, 12-Bit, 1 Func, 8 Channel, Parallel, Word Access, PQCC44, P
MAX181AEQL MAXIM

获取价格

Single-Ended Data Acquisition System
MAX181AMJL MAXIM

获取价格

Complete, 8-Channel, 12-Bit Data-Acquisition Systems