EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX17575
4.5V–60V, 1.5A, High-Efficiency,
Synchronous Step-Down DC-DC Converter
with Internal Compensation
General Description
Benefits and Features
● Reduces External Components and Total Cost
The MAX17575 high-efficiency, high-voltage, synchronous
step-down DC-DC converter with integrated MOSFETs
operates over a 4.5V to 60V input. The converter can
deliver up to 1.5A and generates output voltages from
• No Schottky-Synchronous Operation
• Internal Compensation for Any Output Voltage
• All-Ceramic Capacitors, Compact Layout
0.9V up to 0.9 x V . The feedback (FB) voltage is accu-
IN
● Reduces Number of DC-DC Regulators to Stock
rate to within ±1.2% over -40°C to +125°C. Built-in com-
pensation across the output-voltage range eliminates the
need for external components. The MAX17575 features
peak-current-mode control architecture and operates
in fixed frequency forced PWM mode. The MAX17575
offers a low minimum on-time that allows high switching
frequencies and a smaller solution size.
• Wide 4.5V to 60V Input
• Adjustable 0.9V to 0.9 × V Output
• Continuous 1.5A Current Over Temperature
• 400kHz to 2.2MHz Adjustable Switching Frequency
with External Synchronization
IN
● Reduces Power Dissipation
• Peak Efficiency of 94%
The device is available in a 12-pin (3mm × 3mm) TDFN
package. Simulation models are available.
• Auxiliary Bootstrap LDO for Improved Efficiency
• 4.65µA Shutdown Current
● Operates Reliably in Adverse Industrial Environments
• Hiccup Mode Overload Protection
• Adjustable Soft-Start
Applications
● Industrial Control Power Supplies
● General-Purpose Point-of-Load
● Distributed Supply Regulation
● Base Station Power Supplies
● Wall Transformer Regulation
● High-Voltage, Single-Board Systems
• Built-In Output-Voltage Monitoring with RESET
• Programmable EN/UVLO Threshold
• Monotonic Startup into Prebiased Load
• Overtemperature Protection
• High Industrial -40°C to +125°C Ambient Operating
Temperature Range/-40°C to +150°C Junction
Temperature Range
Ordering Information appears at end of data sheet.
5V Output: Typical Application Circuit and Efficiency vs. Load Current
V
IN
V
EN/UVLO
BST
IN
C1
f
= 500kHz
V
SW
2.2µF
PGND
SGND
C4
0.1µF
L1
15µH
MAX17575
OUT
5V, 1.5A
LX
FB
R1
RT/SYNC
SS
FB
75kΩ
C5
22µF
FB
RESET
EXTVCC
R3
4.7Ω
C3
5.6nF
R2
16.2kΩ
V
CC
EP
C2
2.2µF
C6
0.1µF
19-8785; Rev 3; 12/19