19-4821; Rev 0; 7/09
Dual-Phase, Quick-PWM Controller for
IMVP-6.5 CPU Core Power Supplies
MAX17582
General Description
Features
o Single-/Dual-Phase, Quick-PWM Controller
o ±±8m m Accuracy Over Line, Load, and
The MAX17582 is a 2-/1-phase-interleaved Quick-
PWM™ step-down VID power-supply controller for
notebook CPUs. True out-of-phase operation reduces
input-ripple-current requirements and output-voltage
ripple, while easing component selection and layout dif-
ficulties. The Quick-PWM control provides instanta-
neous response to fast load-current steps. Active
voltage positioning reduces power dissipation and bulk
output capacitance requirements and allows ideal posi-
tioning compensation for tantalum, polymer, or ceramic
bulk output capacitors.
OUT
Te8perature
o 7-Bit 0 to 1.50m mID Control
o Dyna8ic Phase Selection Opti8izes Active/Sleep
Efficiency
o Transient Phase Overlap Reduces Output
Capacitance
o Integrated Boost Switches
o Active moltage Positioning with Adjustable Gain
o Progra88able 200kHz to ±00kHz Switching
A slew-rate controller allows controlled transitions among
VID codes, controlled soft-start and shutdown, and con-
trolled exit from suspend. A thermistor-based temperature
sensor provides a programmable thermal-fault output
(VRHOT). A current-monitor output (IMON) provides an
analog current output proportional to the power consumed
by the CPU. The MAX17582 includes output undervolt-
age and thermal protection. When any of these protec-
tion features detect a fault, the controller shuts down. A
voltage-regulator power-OK (PWRGD) output indicates
the output is in regulation. Additionally, the MAX17582
features true differential current sense and a phase-good
(PHASEGD) output that indicates a phase imbalance
fault condition.
Frequency
o Accurate Current Balance and Current Li8it
o Adjustable Slew-Rate Control
o Power-Good, Clock Enable, and Ther8al-Fault
Outputs
o Phase Current I8balance Fault Output
o Drives Large Synchronous Rectifier MOSFETs
o 4m to 26m Battery Input-moltage Range
o Undervoltage and Ther8al-Fault Protection
o IMmP-6.5 Power Sequencing and Ti8ing
Co8pliant
o Soft-Startup and Soft-Shutdown
The MAX17582 implements the Intel IMVP-6.5 VID code
set. The MAX17582 is available in a 6mm x 6mm,
48-pin TQFN package.
Pin Configuration
Applications
TOP VIEW
IMVP-6.5 Core Supply
35 34 33 32 31 30 29 28 27
36
26
25
Multiphase CPU Core Supply
Voltage-Positioned, Step-Down Converters
Notebook/Desktop Computers
Blade Servers
24
23
22
21
20
19
18
17
16
15
14
13
N.C. 37
N.C.
38
39
40
41
42
43
44
45
46
47
48
SLOW
D0
PHASEGD
PWRGD
CLKEN
V3P3
D1
D2
D3
TON
Ordering Information
MAX17582
D4
PSI
PART
TEMP RANGE
PIN-PACKAGE
D5
DPRSLPVR
SHDN
CSP2
MAX17582GTM+
-40°C to +105°C
48 TQFN-EP*
D6
CSP1
GND
CSN1
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
*EP
GND
+
GND
CSN2
2
3
4
5
6
7
8
9
10
1
11
12
THIN QFN
(688 x 688)
Quick-PWM is a trademark of Maxim Integrated Products, Inc.
*EXPOSED PAD. CONNECTED TO GND.
________________________________________________________________ Maxi8 Integrated Products
1
For pricing, delivery, and ordering infor8ation, please contact Maxi8 Direct at 1-±±±-629-4642,
or visit Maxi8’s website at www.8axi8-ic.co8.