19-4746; Rev 4; 4/11
High-Voltage, Linear High-Brightness LED
Driver with Open-LED Fault Detect
General Description
Features
The MAX16839 programmable current regulator operates
from a 5V to 40V input voltage range and features an
open-drain, constant-current-sink output capable of sink-
ing up to 100mA. The MAX16839 is well suited for auto-
motive applications and other applications that require a
general-purpose linear LED driver. The device directly
withstands automotive load-dump events of up to 45V.
S 5V to 40V Operating Range
S Integrated 2I Open-Drain Pass Transistor
S 15mA to 100mA Programmable LED Current
S PWM Dimming
S Open-LED Fault Detection
S Open-LED Fault Event Status Memory
An on-board pass element minimizes external compo-
nent count while providing Q5% output current accuracy.
The MAX16839 includes a dimming input that controls
the duty cycle of the output current, allowing a wide LED
dimming range. In addition, the dimming input functions
as an on/off control of the output current. In multiple LED-
string applications, the dimming input synchronizes the
LED current-sink turn-on, ensuring simultaneous bright-
ness in LED strings.
S LED Open-Fault Detect Latches Off Multiple LED
Strings
S Multichip Synchronized LED Current Sink
S
5ꢀ LED Current Accuracy
S -40NC to +125NC Operating Temperature Range
S Thermal Protection
S Undervoltage Lockout
S 6-Pin TDFN-EP and 8-Pin SO-EP Packages
Additional features include thermal and open-LED
protection and an open-LED fault-detection output. In
multiple LED string applications where all FLTS pins are
connected together, an open-LED detection in one LED
string turns off all the strings simultaneously. Open-LED
protection also features fault memory, to avoid LED flash-
ing during subsequent power-up cycles.
Ordering Information
PART
TEMP RANGE
-40NC to +125NC
-40NC to +125NC
-40NC to +125NC
PIN-PACKAGE
6 TDFN-EP*
8 SO-EP*
MAX16839ATT+
MAX16839ASA+
MAX16839ATT/V+
6 TDFN-EP*
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
/V denotes an automotive qualified part.
The MAX16839 is available in thermally enhanced, 6–pin
TDFN-EP and 8-pin SO-EP packages and is specified
over the -40NC to +125NC automotive temperature range.
Typical Application Circuit
Applications
Automotive Exterior: Turn Signal Light, Brake
Light, Tail and Marker Lights
V
BAT
V
IN
= 5V TO 40V
Automotive Interior: Cluster and Warning Lights,
Dome and Map Lights
Truck, Train, Airplane, and Emergency Car LED
Lighting
REVERSE
PROTECTION DIODE
I
= 100mA
LED
General Lighting: Signage, LED Lamps
C
IN
= 0.01FF
LEDs
IN
DIM
SINK
CS
Pin Configurations appear at end of data sheet.
MAX16839
FLTS
GND
C
= 0.1FF
R
CS
= 2I
FLTS
_______________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.