19-1053; Rev 3; 4/11
Single/Dual, 16ns, High Sink/Source
Current Gate Drivers
4/MAX1025
General Description
Features
The MAX15024/MAX15025 single/dual, high-speed
MOSFET gate drivers are capable of operating at fre-
quencies up to 1MHz with large capacitive loads. The
MAX15024 includes internal source-and-sink output
transistors with independent outputs allowing for control
of the external MOSFET’s rise and fall time. The
MAX15024 is a single gate driver capable of sinking an
8A peak current and sourcing a 4A peak current. The
MAX15025 is a dual gate driver capable of sinking a 4A
peak current and sourcing a 2A peak current. An inte-
grated adjustable LDO voltage regulator provides gate-
drive amplitude control and optimization.
o 8A Peak Sink Current/4A Peak Source Current
(MAX15024)
o 4A Peak Sink Current/2A Peak Source Current
(MAX15025)
o Low 16ns Propagation Delay
o 4.5 V to 28V Supply Voltage Range
o On-Board Adjustable LDO for Gate-Drive
Amplitude Control and Optimization
o Separate Output Driver Supply
The MAX15024A and MAX15025A/C accept transistor-
to-transistor (TTL) input logic levels while the
MAX15024B and MAX15025B/D accept CMOS-input
logic levels. High sourcing/sinking peak currents, a low
propagation delay, and thermally enhanced packages
make the MAX15024/MAX15025 ideal for high-frequency
and high-power circuits. The MAX15024/MAX15025
operate from a 4.5V to 28V supply. A separate output dri-
ver supply input enhances flexibility and permits a soft-
start of the power MOSFETs used in synchronous
rectifiers.
o Independent Source and Sink Outputs (MAX15024)
o Matched Delays Between Inverting and
Noninverting Inputs (MAX15024)
o Matched Delays Between Channels (MAX15025)
o CMOS or TTL Logic-Level Inputs with Hysteresis
for Noise Immunity
o -40°C to +125°C Operating Temperature Range
o Thermal-Shutdown Protection
The MAX15024/MAX15025 are available in 10-pin
TDFN packages and are specified over the -40°C to
+125°C automotive temperature range.
o 1.95W Thermally Enhanced TDFN Power Packages
o AEC-Q100 Qualified
Applications
Synchronous Rectifier Drivers
Ordering Information
Power-Supply Modules
PART
PIN-PACKAGE
10 TDFN-EP*
10 TDFN-EP*
10 TDFN-EP*
10 TDFN-EP*
10 TDFN-EP*
10 TDFN-EP*
10 TDFN-EP*
10 TDFN-EP*
TOP MARK
ATX
Switching Power Supply
MAX15024AATB+T
MAX15024AATB/V+T
MAX15024BATB+T
MAX15025AATB+T
MAX15025AATB/V+T
MAX15025BATB+T
MAX15025CATB+T
MAX15025DATB+T
AWT
Pin Configurations
ATY
TOP VIEW
ATZ
AYE
AUA
10
9
8
7
6
AUB
AUC
Note: All devices are specified over the -40°C to +125°C operating
temperature range.
MAX15024
+Denotes a lead(Pb)-free/RoHS-compliant package.
/V = denotes an automotive qualified part.
EP*
*EP = Exposed pad. T = Tape and reel.
See the Selector Guide at the end of the data sheet.
1
2
3
4
5
TDFN
*EP = EXPOSED PAD.
Pin Configurations continued at end of data sheet.
Block Diagrams appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.