19-1053; Rev 0; 10/07
Single/Dual, 16ns, High Sink/Source
Current Gate Drivers
4/MAX1025
General Description
Features
o 8A Peak Sink Current/4A Peak Source Current
The MAX15024/MAX15025 single/dual, high-speed
MOSFET gate drivers are capable of operating at fre-
quencies up to 1MHz with large capacitive loads. The
MAX15024 includes internal source-and-sink output
transistors with independent outputs allowing for control
of the external MOSFET’s rise and fall time. The
MAX15024 is a single gate driver capable of sinking an
8A peak current and sourcing a 4A peak current. The
MAX15025 is a dual gate driver capable of sinking a 4A
peak current and sourcing a 2A peak current. An inte-
grated adjustable LDO voltage regulator provides gate-
drive amplitude control and optimization.
(MAX15024)
o 4A Peak Sink Current/2A Peak Source Current
(MAX15025)
o Low 16ns Propagation Delay
o 4.5V to 28V Supply Voltage Range
o On-Board Adjustable LDO for Gate-Drive
Amplitude Control and Optimization
o Separate Output Driver Supply
o Independent Source and Sink Outputs (MAX15024)
The MAX15024A/C and MAX15025A/C/E/G accept tran-
sistor-to-transistor (TTL) input logic levels while the
MAX15024B/D and MAX15025B/D/F/H accept CMOS-
input logic levels. High sourcing/sinking peak currents, a
low propagation delay, and thermally enhanced pack-
ages make the MAX15024/MAX15025 ideal for high-fre-
quency and high-power circuits. The MAX15024/
MAX15025 operate from a 4.5V to 28V supply. A sepa-
rate output driver supply input enhances flexibility and
permits a soft-start of the power MOSFETs used in syn-
chronous rectifiers.
o Matched Delays Between Inverting and
Noninverting Inputs (MAX15024)
o Matched Delays Between Channels (MAX15025)
o CMOS or TTL Logic-Level Inputs with Hysteresis
for Noise Immunity
o -40°C to +125°C Operating Temperature Range
o Thermal-Shutdown Protection
o 1.95W Thermally Enhanced TDFN Power Packages
The MAX15024/MAX15025 are available in 10-pin
TDFN packages and are specified over the -40°C to
+125°C automotive temperature range.
Ordering Information
Applications
PKG
CODE
TOP
MARK
PART
PIN-PACKAGE
Synchronous Rectifier Drivers
MAX15024AATB+T* 10 TDFN-EP**
MAX15024BATB+T 10 TDFN-EP**
T1033-1
T1033-1
T1033-1
T1033-1
T1033-1
T1033-1
T1033-1
T1033-1
T1033-1
T1033-1
T1033-1
T1033-1
ATX
ATY
—
Power-Supply Modules
Switching Power Supply
MAX15024CATB+T* 10 TDFN-EP**
MAX15024DATB+T* 10 TDFN-EP**
MAX15025AATB+T 10 TDFN-EP**
MAX15025BATB+T* 10 TDFN-EP**
MAX15025CATB+T* 10 TDFN-EP**
MAX15025DATB+T* 10 TDFN-EP**
MAX15025EATB+T* 10 TDFN-EP**
MAX15025FATB+T* 10 TDFN-EP**
MAX15025GATB+T* 10 TDFN-EP**
MAX15025HATB+T* 10 TDFN-EP**
Pin Configurations
—
ATZ
AUA
AUB
AUC
—
TOP VIEW
10
9
8
7
6
—
—
MAX15024
—
Note: All devices are specified over the -40°C to +125°C operating
EP*
temperature range.
1
2
3
4
5
+Denotes a lead-free package.
*Future product—contact factory for availability.
**EP = Exposed pad. T = Tape and reel.
See the Selector Guide at the end of the data sheet.
TDFN
*EP = EXPOSED PAD.
Pin Configurations continued at end of data sheet.
Block Diagrams appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.