5秒后页面跳转
MAX1421CCM PDF预览

MAX1421CCM

更新时间: 2024-11-10 22:36:23
品牌 Logo 应用领域
美信 - MAXIM /
页数 文件大小 规格书
17页 310K
描述
12-Bit, 40Msps, +3.3V, Low-Power ADC with Internal Reference

MAX1421CCM 技术参数

是否无铅: 含铅是否Rohs认证: 不符合
生命周期:Active零件包装代码:QFP
包装说明:7 X 7 MM, 1.40 MM HEIGHT, MS-026BBC, TQFP-48针数:48
Reach Compliance Code:not_compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.33
最大模拟输入电压:1.0752 V最小模拟输入电压:-1.0752 V
转换器类型:ADC, PROPRIETARY METHODJESD-30 代码:S-PQFP-G48
长度:7 mm湿度敏感等级:1
模拟输入通道数量:1位数:12
功能数量:1端子数量:48
最高工作温度:70 °C最低工作温度:
输出位码:OFFSET BINARY输出格式:PARALLEL, WORD
封装主体材料:PLASTIC/EPOXY封装代码:LFQFP
封装等效代码:QFP48,.35SQ,20封装形状:SQUARE
封装形式:FLATPACK, LOW PROFILE, FINE PITCH峰值回流温度(摄氏度):225
电源:3.3 V认证状态:Not Qualified
采样速率:40 MHz采样并保持/跟踪并保持:TRACK
座面最大高度:1.6 mm子类别:Analog to Digital Converters
标称供电电压:3.3 V表面贴装:YES
技术:CMOS温度等级:COMMERCIAL
端子形式:GULL WING端子节距:0.5 mm
端子位置:QUAD处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:7 mmBase Number Matches:1

MAX1421CCM 数据手册

 浏览型号MAX1421CCM的Datasheet PDF文件第2页浏览型号MAX1421CCM的Datasheet PDF文件第3页浏览型号MAX1421CCM的Datasheet PDF文件第4页浏览型号MAX1421CCM的Datasheet PDF文件第5页浏览型号MAX1421CCM的Datasheet PDF文件第6页浏览型号MAX1421CCM的Datasheet PDF文件第7页 
19-1900; Rev 0; 5/01  
12-Bit, 40Msps, +3.3V, Low-Power ADC  
with Internal Reference  
General Description  
Features  
The MAX1421 is a +3.3V, 12-bit analog-to-digital con-  
verter (ADC), featuring a fully-differential input,  
pipelined, 12-stage ADC architecture with wideband  
track-and-hold (T/H) and digital error correction incor-  
porating a fully-differential signal path. The MAX1421 is  
optimized for low-power, high-dynamic performance  
applications in imaging and digital communications.  
The converter operates from a single +3.3V supply,  
consuming only 188mW while delivering a typical sig-  
nal-to-noise ratio (SNR) of 66dB at an input frequency  
of 15MHz and a sampling frequency of 40Msps. The  
fully-differential input stage has a small signal -3dB  
bandwidth of 400MHz and may be operated with sin-  
gle-ended inputs.  
o Single +3.3V Power Supply  
o 67dB SNR at f = 5MHz  
IN  
o 66dB SNR at f = 15MHz  
IN  
o Internal, +2.048V Precision Bandgap Reference  
o Differential, Wideband Input T/H Amplifier  
o Power-Down Modes  
180mW (Reference Shutdown Mode)  
10µW (Shutdown Mode)  
o Space-Saving 48-Pin TQFP Package  
An internal +2.048V precision bandgap reference sets  
the full-scale range of the ADC. A flexible reference  
structure accommodates an internal or externally  
applied buffered or unbuffered reference for applica-  
tions requiring increased accuracy or a different input  
voltage range.  
Ordering Information  
PART  
TEMP. RANGE  
PIN-PACKAGE  
MAX1421CCM  
MAX1421ECM  
0°C to +70°C  
48 TQFP  
In addition to low operating power, the MAX1421 fea-  
tures two power-down modes, a reference power-down  
and a shutdown mode. In reference power-down, the  
internal bandgap reference is deactivated, resulting in  
a typical 2mA supply current reduction. For idle peri-  
ods, a full shutdown mode is available to maximize  
power savings.  
-40°C to +85°C  
48 TQFP  
Pin Configuration  
The MAX1421 provides parallel, offset binary, CMOS-  
compatible three-state outputs.  
The MAX1421 is available in a 7mm x 7mm, 48-pin  
TQFP package, and is specified over the commercial  
(0°C to +70°C) and the extended industrial (-40°C to  
+85°C) temperature ranges.  
AGND  
1
2
36 D9  
35 D8  
34 D7  
33 D6  
Pin-compatible higher- and lower-speed versions of the  
MAX1421 are also available. Please refer to the  
MAX1420 data sheet for a frequency of 60Msps and  
the MAX1422 data sheet for a frequency of 20Msps.  
AV  
DD  
AV  
DD  
3
AGND  
AGND  
INP  
4
5
32 DV  
31 DV  
DD  
6
DD  
MAX1421  
________________________Applications  
INN  
7
30 DGND  
29 DGND  
AGND  
AGND  
8
Medical Ultrasound Imaging  
CCD Pixel Processing  
Data Acquisition  
D5  
D4  
D3  
D2  
9
28  
27  
26  
25  
AV  
DD  
10  
11  
12  
AV  
DD  
AGND  
Radar  
IF and Baseband Digitization  
48-TQFP  
Functional Diagram appears at end of data sheet.  
________________________________________________________________ Maxim Integrated Products  
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at  
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.  

与MAX1421CCM相关器件

型号 品牌 获取价格 描述 数据表
MAX1421CCM+TD MAXIM

获取价格

ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, PQFP48, 7 X 7 M
MAX1421CCM-D MAXIM

获取价格

ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, PQFP48, 7 X 7 M
MAX1421CCM-T MAXIM

获取价格

ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, PQFP48, 7 X 7 M
MAX1421CCM-TD MAXIM

获取价格

ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, PQFP48, 7 X 7 M
MAX1421ECM MAXIM

获取价格

12-Bit, 40Msps, +3.3V, Low-Power ADC with Internal Reference
MAX1421ECM+ MAXIM

获取价格

12-Bit, 40Msps, 3.3V, Low-Power ADC with Internal Reference
MAX1421ECM+TD MAXIM

获取价格

ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, PQFP48, 7 X 7 M
MAX1421ECM-TD MAXIM

获取价格

ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, PQFP48, 7 X 7 M
MAX1422 MAXIM

获取价格

12-Bit, 20Msps, 3.3V, Low-Power ADC with Internal Reference
MAX1422 ADI

获取价格

12位、20Msps、+3.3V、低功耗ADC,内置电压基准