19-0792; Rev 0; 4/07
1.62V to 3.6V Improved High-Speed LLT
General Description
Features
The MAX13042E–MAX13045E 4-channel, bidirectional
level translators provide the level shifting necessary for
100Mbps data transfer in multivoltage systems. The
MAX13042E–MAX13045E are ideally suited for level
translation in systems with four channels. Externally
ꢀ Compatible with 4mA Input Drivers or Larger
ꢀ 100Mbps Guaranteed Data Rate
ꢀ Four Bidirectional Channels
ꢀ Enable Input
applied voltages, V
and V , set the logic levels on
L
CC
either side of the device. Logic signals present on the
V side of the device appear as a high-voltage logic
ꢀ
1ꢀ5k EꢁD ꢂrotection on Iꢃ/ k
Lines
CC_
L
ꢀ +1.62k
k
L
+3.2k and +2.2k
k
CC
+3.6k
signal on the V
side of the device and vice-versa.
CC
ꢁupply koltage Range
The MAX13042E–MAX13045E operate at full speed
with external drivers that source as little as 4mA output
current or larger. Each input/output (I/O) channel is
ꢀ 12-Bump UCꢁꢂ (1.ꢀ4mm x 2.12mm) and
14-ꢂin TDFN (3mm x 3mm) Lead-Free ꢂac5ages
pulled up to V
or V by an internal 30µA current
L
CC
source, allowing the MAX13042E–MAX13045E to be
driven by either push-pull or open-drain drivers.
Typical Operating Circuit
The MAX13042E–MAX13045E feature an enable (EN)
input that places the devices into a low-power shutdown
mode when driven low. The MAX13042E–MAX13045E
feature an automatic shutdown mode that disables the
+3.3V
+1.8V
0.1 F
1 F
0.1 F
part when V
is less than V . The state of I/O V
and
CC
L
CC_
I/O V during shutdown is chosen by selecting the
L_
V
V
appropriate part version. (See the Ordering Information/
Selector Guide).
L
CC
+1.8V
+3.3V
SYSTEM
SYSTEM
MAX13042E–
MAX13045E
CONTROLLER
The MAX13042E–MAX13045E operate with V
volt-
CC
ages from +2.2V to +3.6V and V voltages from +1.62V
L
EN
DATA
EN
I/O V
to +3.2V, making them ideal for data transfer between
low-voltage ASIC/PLDs and higher voltage systems.
The MAX13042E–MAX13045E are available in 12-bump
UCSP™ (1.54mm x 2.12mm) and 14-pin TDFN (3mm x
3mm) packages, and operate over the extended -40°C
to +85°C temperature range.
I/O V
DATA
L_
CC_
4
4
GND
GND
GND
Applications
Portable POS Systems
UCSP is a trademark of Maxim Integrated Products, Inc.
SPI is a trademark of Motorola, Inc.
CMOS Logic-Level
Translation
MICROWIRE is a trademark of National Semiconductor Corp.
Portable Communication
Devices
Low-Voltage ASIC Level
Translation
Pin Configurations appear at end of data sheet.
GPS
Cell Phones
Telecommunications
Equipment
Ordering Information/Selector Guide continued at end of
data sheet.
SPI™, MICROWIRE™
Level Translation
Ordering Information/Selector Guide
ꢂIN-
ꢂACKAGE
Iꢃ/ k ꢁTATE DURING
L_
Iꢃ/ k
ꢁTATE DURING
ꢁHUTD/WN
T/ꢂ
MARK
CC_
ꢂART
ꢂKG C/DE
ꢁHUTD/WN
High Impedance
High Impedance
MAX13042EEBC+T 12 UCSP-12
MAX13042EETD+T 14 TDFN-EP**
High Impedance
High Impedance
ADQ
ADE
B12-3
T1433-2
Note: All devices operate over the -40°C to +85°C temperature
range.
*Future product—contact factory for availability.
**EP = Exposed paddle.
+Denotes a lead-free package.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.