5秒后页面跳转
MAX1208ETL-T PDF预览

MAX1208ETL-T

更新时间: 2024-11-21 21:03:07
品牌 Logo 应用领域
美信 - MAXIM 转换器
页数 文件大小 规格书
27页 1030K
描述
ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, 6 X 6 MM, 0.8 MM HEIGHT, MO-220-WJJD, TQFN-40

MAX1208ETL-T 技术参数

是否无铅: 含铅是否Rohs认证: 不符合
生命周期:Obsolete零件包装代码:QFN
包装说明:HVQCCN, LCC40,.24SQ,20针数:40
Reach Compliance Code:not_compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.9
最大模拟输入电压:1.024 V最小模拟输入电压:-1.024 V
转换器类型:ADC, FLASH METHODJESD-30 代码:S-XQCC-N40
JESD-609代码:e0长度:6 mm
模拟输入通道数量:1位数:12
功能数量:1端子数量:40
最高工作温度:85 °C最低工作温度:-40 °C
输出位码:2'S COMPLEMENT BINARY输出格式:PARALLEL, WORD
封装主体材料:UNSPECIFIED封装代码:HVQCCN
封装等效代码:LCC40,.24SQ,20封装形状:SQUARE
封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE峰值回流温度(摄氏度):NOT SPECIFIED
电源:3.3 V认证状态:Not Qualified
采样速率:80 MHz采样并保持/跟踪并保持:TRACK
座面最大高度:0.8 mm子类别:Analog to Digital Converters
标称供电电压:3.3 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Tin/Lead (Sn/Pb)端子形式:NO LEAD
端子节距:0.5 mm端子位置:QUAD
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:6 mm
Base Number Matches:1

MAX1208ETL-T 数据手册

 浏览型号MAX1208ETL-T的Datasheet PDF文件第2页浏览型号MAX1208ETL-T的Datasheet PDF文件第3页浏览型号MAX1208ETL-T的Datasheet PDF文件第4页浏览型号MAX1208ETL-T的Datasheet PDF文件第5页浏览型号MAX1208ETL-T的Datasheet PDF文件第6页浏览型号MAX1208ETL-T的Datasheet PDF文件第7页 
19-1002; Rev 0; 8/04  
12-Bit, 80Msps, 3.3V ADC  
General Description  
Features  
The MAX1208 is a 3.3V, 12-bit, 80Msps analog-to-digital  
converter (ADC) featuring a fully differential wideband  
track-and-hold (T/H) input amplifier, driving a low-noise  
internal quantizer. The analog input stage accepts single-  
ended or differential signals. The MAX1208 is optimized  
for low power, small size, and high dynamic performance  
in baseband applications.  
Excellent Dynamic Performance  
68.2dB/68.0dB SNR at f = 3MHz/70MHz  
89.3dBc/85.1dBc SFDR at f = 3MHz/70MHz  
IN  
IN  
3.3V Low-Power Operation  
373mW (Single-Ended Clock Mode)  
399mW (Differential Clock Mode)  
3µW (Power-Down Mode)  
Powered from a single 3.0V to 3.6V supply, the  
MAX1208 consumes only 373mW while delivering a  
typical signal-to-noise (SNR) performance of 68.2dB at  
an input frequency of 32.5MHz. In addition to low oper-  
ating power, the MAX1208 features a 3µW power-down  
mode to conserve power during idle periods.  
Differential or Single-Ended Clock  
Fully Differential or Single-Ended Analog Input  
Adjustable Full-Scale Analog Input Range: 0.35V  
to 1.15V  
Common-Mode Reference  
A flexible reference structure allows the MAX1208 to use  
the internal 2.048V bandgap reference or accept an  
externally applied reference. The reference structure  
allows the full-scale analog input range to be adjusted  
from 0.35V to 1.15V. The MAX1208 provides a com-  
mon-mode reference to simplify design and reduce exter-  
nal component count in differential analog input circuits.  
The MAX1208 supports both a single-ended and differ-  
ential input clock drive. Wide variations in the clock  
duty cycle are compensated with the ADC’s internal  
duty-cycle equalizer (DCE).  
ADC conversion results are available through a 12-bit,  
parallel, CMOS-compatible output bus. The digital out-  
put format is pin selectable to be either two’s comple-  
ment or Gray code. A data-valid indicator eliminates  
external components that are normally required for reli-  
able digital interfacing. A separate digital power input  
accepts a wide 1.7V to 3.6V supply, allowing the  
MAX1208 to interface with various logic levels.  
CMOS-Compatible Outputs in Two’s Complement  
or Gray Code  
Data-Valid Indicator Simplifies Digital Design  
Data Out-of-Range Indicator  
Miniature, 40-Pin Thin QFN Package with Exposed  
Paddle  
Evaluation Kit Available (Order MAX1211EVKIT)  
Ordering Information  
PIN-  
PACKAGE  
PKG  
CODE  
PART  
TEMP RANGE  
40 Thin QFN  
(6mm x 6mm x  
0.8mm)  
MAX1208ETL -40°C to +85°C  
T4066-3  
The MAX1208 is available in a 6mm x 6mm x 0.8mm,  
40-pin thin QFN package with exposed paddle (EP),  
and is specified for the extended industrial (-40°C to  
+85°C) temperature range.  
See the Pin-Compatible Versions table for a complete  
family of 14-bit and 12-bit high-speed ADCs.  
Pin-Compatible Versions  
SAMPLING  
RATE (Msps)  
RESOLUTION  
(BITS)  
TARGET  
APPLICATION  
PART  
MAX12553  
MAX1209  
MAX1211  
MAX1208  
MAX1207  
MAX1206  
65  
80  
65  
80  
65  
40  
14  
12  
12  
12  
12  
12  
IF/Baseband  
IF  
Applications  
Communication Receivers  
IF  
Cellular, Point-to-Point Microwave, HFC, WLAN  
Baseband  
Baseband  
Baseband  
Ultrasound and Medical Imaging  
Portable Instrumentation  
Low-Power Data Acquisition  
Pin Configuration appears at end of data sheet.  
________________________________________________________________ Maxim Integrated Products  
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at  
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.  

与MAX1208ETL-T相关器件

型号 品牌 获取价格 描述 数据表
MAX1209 MAXIM

获取价格

40Msps, 12-Bit ADC
MAX1209ETL MAXIM

获取价格

暂无描述
MAX1209ETL+ MAXIM

获取价格

ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, 6 X 6 MM, 0.8 M
MAX1209ETL+G3U MAXIM

获取价格

ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, 6 X 6 MM, 0.8 MM HEIG
MAX1209ETL+T MAXIM

获取价格

ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, 6 X 6 MM, 0.8 M
MAX1209ETL+TG3U MAXIM

获取价格

ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, 6 X 6 MM, 0.8 MM HEIG
MAX1209ETL-T MAXIM

获取价格

ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, 6 X 6 MM, 0.8 M
MAX120C/D MAXIM

获取价格

500ksps, 12-Bit ADCs with Track/Hold And Refrence
MAX120CAG MAXIM

获取价格

500ksps, 12-Bit ADCs with Track/Hold And Refrence
MAX120CNG MAXIM

获取价格

500ksps, 12-Bit ADCs with Track/Hold And Refrence