5秒后页面跳转
捷配首页

Datasheet > MAX1209ETL+T
MAX1209ETL+T PDF预览

MAX1209ETL+T

更新时间： 2024-11-18 19:50:55
品牌 Logo 应用领域
美信 - MAXIM 转换器
页数 文件大小 规格书
27页 368K
描述
ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, 6 X 6 MM, 0.8 MM HEIGHT, ROHS COMPLIANT, MO-220-WJJD-2, TQFN-40

阅读下载

中文翻译

获取价格

MAX1209ETL+T 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Obsolete零件包装代码：QFN
包装说明：HVQCCN, LCC40,.24SQ,20针数：40
Reach Compliance Code：compliantECCN代码：3A991.C.2
HTS代码：8542.39.00.01风险等级：5.79
最大模拟输入电压：1.15 V最小模拟输入电压：-1.15 V
转换器类型：ADC, FLASH METHODJESD-30 代码：S-XQCC-N40
JESD-609代码：e3长度：6 mm
湿度敏感等级：1模拟输入通道数量：1
位数：12功能数量：1
端子数量：40最高工作温度：85 °C
最低工作温度：-40 °C输出位码：2'S COMPLEMENT BINARY
输出格式：PARALLEL, WORD封装主体材料：UNSPECIFIED
封装代码：HVQCCN封装等效代码：LCC40,.24SQ,20
封装形状：SQUARE封装形式：CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
峰值回流温度（摄氏度）：260电源：2,3.3 V
认证状态：Not Qualified采样速率：80 MHz
采样并保持/跟踪并保持：TRACK座面最大高度：0.8 mm
子类别：Analog to Digital Converters标称供电电压：3.3 V
表面贴装：YES技术：CMOS
温度等级：INDUSTRIAL端子面层：TIN
端子形式：NO LEAD端子节距：0.5 mm
端子位置：QUAD处于峰值回流温度下的最长时间：NOT SPECIFIED
宽度：6 mmBase Number Matches：1

MAX1209ETL+T 数据手册

 浏览型号MAX1209ETL+T的Datasheet PDF文件第2页浏览型号MAX1209ETL+T的Datasheet PDF文件第3页浏览型号MAX1209ETL+T的Datasheet PDF文件第4页浏览型号MAX1209ETL+T的Datasheet PDF文件第5页浏览型号MAX1209ETL+T的Datasheet PDF文件第6页浏览型号MAX1209ETL+T的Datasheet PDF文件第7页 
19-1001; Rev 0; 8/04  
12-Bit, 80Msps, 3.3V IF-Sampling ADC  
General Description  
Features  
The MAX1209 is a 3.3V, 12-bit, 80Msps analog-to-digital  
converter (ADC) featuring a fully differential wideband  
track-and-hold (T/H) input amplifier, driving a low-noise  
internal quantizer. The analog input stage accepts sin-  
gle-ended or differential signals. The MAX1209 is opti-  
mized for low power, small size, and high dynamic  
performance. Excellent dynamic performance is main-  
tained from baseband to input frequencies of 175MHz  
and beyond, making the MAX1209 ideal for intermediate-  
frequency (IF) sampling applications.  
♦ Direct IF Sampling Up to 400MHz  
♦ Excellent Dynamic Performance  
68.0dB/66.5dB SNR at f = 70MHz/175MHz  
85.1dBc/85.5dBc SFDR at f = 70MHz/175MHz  
IN  
IN  
♦ 3.3V Low-Power Operation  
366mW (Single-Ended Clock Mode)  
393mW (Differential Clock Mode)  
3µW (Power-Down Mode)  
♦ Differential or Single-Ended Clock  
Powered from a single 3.0V to 3.6V supply, the  
MAX1209 consumes only 366mW while delivering a  
typical signal-to-noise (SNR) performance of 66.5dB at  
an input frequency of 175MHz. In addition to low oper-  
ating power, the MAX1209 features a 3µW power-down  
mode to conserve power during idle periods.  
♦ Fully Differential or Single-Ended Analog Input  
♦ Adjustable Full-Scale Analog Input Range: 0.35V  
to 1.15V  
♦ Common-Mode Reference  
A flexible reference structure allows the MAX1209 to use  
the internal 2.048V bandgap reference or accept an  
externally applied reference. The reference structure  
allows the full-scale analog input range to be adjusted  
from 0.35V to 1.15V. The MAX1209 provides a com-  
mon-mode reference to simplify design and reduce exter-  
nal component count in differential analog input circuits.  
The MAX1209 supports both a single-ended and differ-  
ential input clock drive. Wide variations in the clock  
duty cycle are compensated with the ADC’s internal  
duty-cycle equalizer (DCE).  
♦ CMOS-Compatible Outputs in Two’s Complement  
or Gray Code  
♦ Data-Valid Indicator Simplifies Digital Design  
♦ Data Out-of-Range Indicator  
♦ Miniature, 40-Pin Thin QFN Package with Exposed  
Paddle  
♦ Evaluation Kit Available (Order MAX1211EVKIT)  
ADC conversion results are available through a 12-bit,  
parallel, CMOS-compatible output bus. The digital out-  
put format is pin selectable to be either two’s comple-  
ment or Gray code. A data-valid indicator eliminates  
external components that are normally required for reli-  
able digital interfacing. A separate digital power input  
accepts a wide 1.7V to 3.6V supply, allowing the  
MAX1209 to interface with various logic levels.  
Ordering Information  
TEMP  
RANGE  
PKG  
CODE  
PART  
PIN-PACKAGE  
-40°C to 40 Thin QFN  
+85°C (6mm x 6mm x 0.8mm)  
MAX1209ETL  
T4066-3  
The MAX1209 is available in a 6mm x 6mm x 0.8mm,  
40-pin thin QFN package with exposed paddle (EP),  
and is specified for the extended industrial (-40°C to  
+85°C) temperature range.  
Pin-Compatible Versions  
See the Pin-Compatible Versions table for a complete  
family of 14-bit and 12-bit high-speed ADCs.  
SAMPLING  
RATE (Msps)  
RESOLUTION  
(BITS)  
TARGET  
APPLICATION  
PART  
MAX12553  
MAX1209  
MAX1211  
MAX1208  
MAX1207  
MAX1206  
65  
80  
65  
80  
65  
40  
14  
12  
12  
12  
12  
12  
IF/Baseband  
IF  
Applications  
IF  
IF Communication Receivers  
Cellular, Point-to-Point Microwave, HFC, WLAN  
Baseband  
Baseband  
Baseband  
Ultrasound and Medical Imaging  
Portable Instrumentation  
Low-Power Data Acquisition  
Pin Configuration appears at end of data sheet.  
________________________________________________________________ Maxim Integrated Products  
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,  
or visit Maxim's website at www.maxim-ic.com.  
1234567...27

中文翻译

下载PDF

MAX1209ETL+T 替代型号

型号 品牌 替代类型 描述 数据表
MAX1208ETL+T MAXIM

完全替代

 ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, 6 X 6 MM, 0.8 M
MAX1209ETL+ MAXIM

完全替代

 ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, 6 X 6 MM, 0.8 M

与MAX1209ETL+T相关器件

型号 品牌 获取价格 描述 数据表
MAX1209ETL+TG3U MAXIM

获取价格

 		ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, 6 X 6 MM, 0.8 MM HEIG
MAX1209ETL-T MAXIM

获取价格

 		ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, 6 X 6 MM, 0.8 M
MAX120C/D MAXIM

获取价格

 		500ksps, 12-Bit ADCs with Track/Hold And Refrence
MAX120CAG MAXIM

获取价格

 		500ksps, 12-Bit ADCs with Track/Hold And Refrence
MAX120CNG MAXIM

获取价格

 		500ksps, 12-Bit ADCs with Track/Hold And Refrence
MAX120CNG+ MAXIM

获取价格

 		ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, P
MAX120CNG-T MAXIM

获取价格

 		ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, P
MAX120CWG MAXIM

获取价格

 		500ksps, 12-Bit ADCs with Track/Hold And Refrence
MAX120CWG+ MAXIM

获取价格

 		ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, P
MAX120EAG MAXIM

获取价格

 		500ksps, 12-Bit ADCs with Track/Hold And Refrence

与MAX1209ETL+T相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证