MAX106CHC

更新时间： 2024-11-05 22:46:27

品牌	Logo	应用领域
美信 - MAXIM		放大器
页数	文件大小	规格书
32页	756K
描述
【5V, 600Msps, 8-Bit ADC with On-Chip 2.2GHz Bandwidth Track/Hold Amplifier

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

MAX106CHC 技术参数

是否无铅：	含铅	是否Rohs认证：	不符合
生命周期：	Obsolete	零件包装代码：	BGA
包装说明：	25 X 25 MM, ESBGA-192	针数：	192
Reach Compliance Code：	not_compliant	ECCN代码：	3A991.C.1
HTS代码：	8542.39.00.01	风险等级：	5.9
最大模拟输入电压：	0.25 V	最小模拟输入电压：	-0.25 V
转换器类型：	ADC, FLASH METHOD	JESD-30 代码：	S-PBGA-B192
JESD-609代码：	e0	长度：	25 mm
最大线性误差 (EL)：	0.1953%	湿度敏感等级：	3
标称负供电电压：	-5 V	模拟输入通道数量：	1
位数：	8	功能数量：	1
端子数量：	192	最高工作温度：	70 °C
最低工作温度：		输出位码：	OFFSET BINARY
输出格式：	PARALLEL, 8 BITS	封装主体材料：	PLASTIC/EPOXY
封装代码：	LBGA	封装等效代码：	BGA192,16X16,50
封装形状：	SQUARE	封装形式：	GRID ARRAY, LOW PROFILE
峰值回流温度（摄氏度）：	240	电源：	+-5,3/5 V
认证状态：	Not Qualified	采样速率：	600 MHz
采样并保持/跟踪并保持：	TRACK	座面最大高度：	1.67 mm
子类别：	Analog to Digital Converters	标称供电电压：	5 V
表面贴装：	YES	技术：	BIPOLAR
温度等级：	COMMERCIAL	端子面层：	Tin/Lead (Sn/Pb)
端子形式：	BALL	端子节距：	1.27 mm
端子位置：	BOTTOM	处于峰值回流温度下的最长时间：	20
宽度：	25 mm	Base Number Matches：	1

MAX106CHC 数据手册

19-1486; Rev 0; 7/99

±5V, 600Msps, 8-Bit ADC with On-Chip

2.2GHz Bandwidth Track/Hold Amplifier

MAX106

General Description

Features

The MAX106 PECL-compatible, 600Msps, 8-bit analog-to-

digital converter (ADC) allows accurate digitizing of ana-

log signals with bandwidths to 2.2GHz. Fabricated on

Maxim’s proprietary advanced GST-2 bipolar process, the

MAX106 integrates a high-performance track/hold (T/H)

amplifier and a quantizer on a single monolithic die.

♦ 600Msps Conversion Rate

♦ 2.2GHz Full-Power Analog Input Bandwidth

♦ 7.6 Effective Bits at f = 300MHz

(Nyquist frequency)

♦ ±0.25LSB INL and DNL

♦ 50Ω Differential Analog Inputs

♦ ±250mV Input Signal Range

The innovative design of the internal T/H, which has an

exceptionally wide 2.2GHz full-power input bandwidth,

results in high, 7.6 effective bits performance at the

Nyquist frequency. A fully differential comparator design

and decoding circuitry combine to reduce out-of-

sequence code errors (thermometer bubbles or sparkle

codes) and provide excellent metastable performance of

♦ On-Chip, +2.5V Precision Bandgap Voltage

Reference

♦ Latched, Differential PECL Digital Outputs

one error per 10 clock cycles. Unlike other ADCs, which

can have errors that result in false full- or zero-scale out-

puts, the MAX106 limits the error magnitude to 1LSB.

-27

♦ Low Error Rate: 10 Metastable States

♦ Selectable 8:16 Demultiplexer

The analog input is designed for either differential or sin-

gle-ended use with a ±250mV input voltage range. Dual,

differential, PECL-compatible output data paths ensure

easy interfacing and include an 8:16 demultiplexer feature

that reduces output data rates to one-half the sampling

clock rate. The PECL outputs can be operated from any

supply between +3V to +5V for compatibility with +3.3V or

+5V referenced systems. Control inputs are provided for

interleaving additional MAX106 devices to increase the

effective system sampling rate.

♦ Internal Demux Reset Input with Reset Output

♦ 192-Contact ESBGA

♦ Pin Compatible with Faster MAX104/MAX108

Ordering Information

PART

TEMP. RANGE

PIN-PACKAGE

MAX106CHC

0°C to +70°C

192 ESBGA

The MAX106 is packaged in a 25mm x 25mm, 192-con-

tact Enhanced Super-Ball-Grid Array (ESBGA™), and is

specified over the commercial (0°C to +70°C) temperature

range. For a pin-compatible higher speed upgrade, refer

to the MAX104 (1Gsps) and MAX108 (1.5Gsps) data

sheets.

192-Contact ESBGA

Ball Assignment Matrix

TOP VIEW

Applications

Digital RF/IF Signal Processing

Direct RF Downconversion

High-Speed Data Acquisition

Digital Oscilloscopes

High-Energy Physics

MAX106

Radar/ECM Systems

ATE Systems

Typical Operating Circuit appears at end of data sheet.

ESBGA

ESBGA is a trademark of Amkor/Anam.

________________________________________________________________ Maxim Integrated Products

For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.

For small orders, phone 1-800-835-8769.

12 3 4 5 6 7...32

中文翻译

下载PDF

MAX106CHC 替代型号

型号	品牌	替代类型	描述	数据表
MAX106CHC-D	MAXIM	类似代替	Â±5V, 600Msps, 8-Bit ADC with On-Chip 2.2GHz
MAX106CHC-TD	MAXIM	功能相似	ADC, Flash Method, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, Bipolar, PBGA192, 25

与MAX106CHC相关器件

型号	品牌	获取价格	描述	数据表
MAX106CHC-D	MAXIM	获取价格	Â±5V, 600Msps, 8-Bit ADC with On-Chip 2.2GHz
MAX106CHC-TD	MAXIM	获取价格	ADC, Flash Method, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, Bipolar, PBGA192, 25
MAX106EVKIT	MAXIM	获取价格	Evaluation Kit for the MAX4223/MAX4224[MAX4223EVKIT ]
MAX107	MAXIM	获取价格	Dual, 6-Bit, 400Msps ADC with On-Chip, Wideband Input Amplifier
MAX1070	MAXIM	获取价格	1.5Msps, Single-Supply, Low-Power, True-Differential, 10-Bit ADCs
MAX1070_09	MAXIM	获取价格	1.5Msps, Single-Supply, Low-Power, True-Differential, 10-Bit ADCs
MAX1070CTC+	MAXIM	获取价格	ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, BICMOS, PQCC12, 4
MAX1070CTC-T	MAXIM	获取价格	1.5Msps, Single-Supply, Low-Power, True-Differential, 10-Bit ADCs
MAX1070ETC	MAXIM	获取价格	暂无描述
MAX1070ETC+T	MAXIM	获取价格	1.5Msps, Single-Supply, Low-Power, True-Differential, 10-Bit ADCs

与MAX106CHC相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

14
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

12
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

36
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

33

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX106CHC

MAX106CHC 技术参数

MAX106CHC 数据手册

MAX106CHC 替代型号

与MAX106CHC相关器件

与MAX106CHC相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX106CHC

MAX106CHC 技术参数

MAX106CHC 数据手册

MAX106CHC 替代型号

与MAX106CHC相关器件

与MAX106CHC相关文章

您还可以找

您在本页遇到什么问题？