5秒后页面跳转
MARTCA65KP75A PDF预览

MARTCA65KP75A

更新时间: 2024-11-21 20:47:35
品牌 Logo 应用领域
美高森美 - MICROSEMI 局域网二极管
页数 文件大小 规格书
3页 117K
描述
Trans Voltage Suppressor Diode, 65000W, 75V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC PACKAGE-2

MARTCA65KP75A 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
包装说明:O-PALF-W2针数:2
Reach Compliance Code:unknownECCN代码:EAR99
HTS代码:8541.10.00.50风险等级:5.92
最小击穿电压:83.3 V外壳连接:ISOLATED
配置:SINGLE二极管元件材料:SILICON
二极管类型:TRANS VOLTAGE SUPPRESSOR DIODEJESD-30 代码:O-PALF-W2
JESD-609代码:e0湿度敏感等级:1
最大非重复峰值反向功率耗散:65000 W元件数量:1
端子数量:2封装主体材料:PLASTIC/EPOXY
封装形状:ROUND封装形式:LONG FORM
峰值回流温度(摄氏度):NOT SPECIFIED极性:UNIDIRECTIONAL
最大功率耗散:7 W认证状态:Not Qualified
最大重复峰值反向电压:75 V表面贴装:NO
技术:AVALANCHE端子面层:TIN LEAD
端子形式:WIRE端子位置:AXIAL
处于峰值回流温度下的最长时间:NOT SPECIFIEDBase Number Matches:1

MARTCA65KP75A 数据手册

 浏览型号MARTCA65KP75A的Datasheet PDF文件第2页浏览型号MARTCA65KP75A的Datasheet PDF文件第3页 
RTCA65KP48A thru RTCA65KP75CA, e3  
AIRCRAFT DC POWER BUS PROTECTION  
S C O T T S D A L E D I V I S I O N  
DESCRIPTION  
APPEARANCE  
Microsemi’s 65 kW bidirectional Transient Voltage Suppressors (TVSs)  
protects 28 volt dc airborne electronic equipment from harsh lightning  
environments per RTCA/DO-160E Section 22 and is compatible with  
Section 16, paragraph 16.6.2.4 Category A for 46.3 V, Category B for 60 V,  
and Category Z for 80 V high-line surges. It is also optionally available with  
screening in accordance with MIL-PRF-19500 or avionics screening as  
described in the Features section. It is also available as RoHS Compliant  
(annealed matte-Tin finish) with an e3 suffix added to the part number.  
Microsemi also offers a broad spectrum of other TVSs to meet your needs.  
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
FEATURES  
APPLICATIONS / BENEFITS  
Unidirectional TVS construction with A suffix or  
bidirectional with a CA suffix  
Pin injection protection per RTCA/DO-160E up to Level  
5 for Waveform 4 (6.4/69 µs) and up to Level 3 for  
Waveform 5A (40/120 μs) at 70oC  
Compatible with “abnormal surge voltage (dc)” in  
16.6.2.4 (Category A, B, and Z) of RTCA/DO-160E  
Suppresses transients up to 65 kW @ 6.4/69 μs  
Fast response with less than 5 ns turn-on time.  
Optional 100% screening for avionics grade is available  
by adding MA prefix to part number for added 100%  
temperature cycle -55oC to +125oC (10X), surge (3X) in  
each direction, 24 hours HTRB in each direction, and post  
test (VBR and ID)  
The RTCA65KP48A is designed for Category A in  
protecting 80V components**  
The RTCA65KP54A or 60A is designed for Category B  
in protecting 90V or 100 V components**  
Options for screening in accordance with MIL-PRF-19500  
for JAN, JANTX, JANTXV, and JANS are also available  
by adding MQ, MX, MV, or MSP prefixes respectively to  
part numbers.  
The RTCA65KP75A is designed for Category Z in  
protecting 125 V components**  
Consult Factory for other voltages with similar Peak  
Pulse Power capabilities.  
Moisture classification is Level 1 with no dry pack required  
per IPC/JEDEC J-STD-020B.  
**includes switching transistors, MOSFETs & IGBTs  
in off-line switching power supplies  
RoHS Compliant devices available by adding “e3” suffix  
MAXIMUM RATINGS  
MECHANICAL & PACKAGING  
Steady-state power dissipation: 7 W @ TL = 25oC  
CASE: Molded Epoxy (meets UL94V-O requirements)  
FINISH: Tin-Lead or RoHS Compliant matte-Tin  
plating solderable per MIL-STD-750, method 2026  
Polarity: Cathode marked with band for unidirectional  
(no band required for bi-directional)  
Peak Pulse Power (PPP) at 25oC: 65 kW at 6.4/69 µs per  
waveform in Figure 8 (derate per Figure 2)  
Repetition rate: 0.01% max.  
Operating & storage temperatures: -55oC to +150oC  
Temperature coefficient of voltage: +0.100%/oC max  
Solder Temperatures: 260oC for 10 s maximum  
MARKING: Manufacturers logo and part number.  
Add prefix MA, MQ, MX, etc., for screened parts.  
Package dimensions: See last page  
ELECTRICAL PARAMETERS @ 25oC Devices are Bidirectional  
Peak Pulse  
Current  
IPP @ 6.4/69 μs  
(Note 2)  
Working  
Standoff  
Voltage  
VWM  
Maximum  
Standby  
Current  
ID @ VWM  
μA  
Minimum  
Breakdown  
Voltage  
Maximum  
Clamping  
Voltage  
MICROSEMI PART  
NUMBER  
Breakdown  
Current  
I(BR)  
VBR @ I(BR)  
VC @ IPP (Note 1)  
(replace A suffix with  
CA for bidirectional)  
V max  
V
mA  
V
A
RTCA65KP48A  
RTCA65KP54A  
RTCA65KP60A  
RTCA65KP75A  
48  
54  
60  
75  
5
5
5
5
53.3  
60.0  
66.7  
83.3  
5
5
5
5
77.7  
87.5  
97.3  
122  
836  
742  
668  
533  
NOTE 1: See MicroNote 108 for lower Clamping Voltage performance at lower IP values relative to IPP and PPP ratings and Figure 1.  
NOTE 2: Equivalent to ratings of 257, 228, 205, and 164 Amps of 20 kW at a longer 10/1000 μs impulse (see Figure 1) with  
clamping voltages shown for the RTCA65KP48A, 54A, 60A, and 75A part numbers respectively. Also see Peak Pulse Power  
(PPP) performance levels for other aircraft waveforms on page 3 for this device series.  
Copyright © 2005  
8-08-2005 REV 0  
Microsemi  
Scottsdale Division  
Page 1  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  

与MARTCA65KP75A相关器件

型号 品牌 获取价格 描述 数据表
MARTCA65KP75AE3 MICROSEMI

获取价格

Trans Voltage Suppressor Diode, 65000W, 75V V(RWM), Unidirectional, 1 Element, Silicon, RO
MARTCA65KP75CA MICROSEMI

获取价格

Trans Voltage Suppressor Diode, 65000W, 75V V(RWM), Bidirectional, 1 Element, Silicon, PLA
MARTCA65KP75CAE3 MICROSEMI

获取价格

Trans Voltage Suppressor Diode, 65000W, 75V V(RWM), Bidirectional, 1 Element, Silicon, ROH
MARVIN-5MP SILICONIMAGE

获取价格

5 Megapixel Camera Interface
MAS10 CUI

获取价格

absolute encoder
MAS1016 MAS

获取价格

AM Receiver IC
MAS1016ATB1 MAS

获取价格

AM Receiver IC
MAS1016ATC1 MAS

获取价格

AM Receiver IC
MAS1016B MAS

获取价格

AM Receiver IC
MAS1016BTB1 MAS

获取价格

AM Receiver IC