MAP200 Series Contactor With 1 Form A (SPST-NO)
Contacts Rated up to 500 Amps, 12-900VDC
Product Facts
ꢀ Designed to be the smallest,
lightest weight, lowest cost
sealed contactor in the industry
with its current rating.
ꢀ Built-in coil economizer
(models requiring external
economizer also available).
ꢀ Optional auxiliary contact for
easy monitoring of power
contact position.
ꢀ Hermetically sealed –
intrinsically safe, operates in
explosive/harsh environments
with no oxidation or
contamination of coils or
contacts, including long periods
of non-operation.
ꢀ Versatile coil and power
connections.
ꢀ MIL-PRF-32085 versions in
development
For factory-direct application assistance, dial
800-253-4560, ext. 2053, or 805-220-2053.
Performance Data
Parameter
Contact Arrangement, power contacts
Rated Operating Voltage
Units Value for MAP200 Series
1 Form A (SPST-NO)
VDC 12 - 900
Coil Operating Voltage (valid over temperature range)
Voltage (will operate)
Voltage (Max.)
18-32VDC
32VDC
18VDC
10VDC
2VDC
Continuous (Carry) Current, Typical
A
500 @ 85°C, 400 mcm conductors
Pickup (close) Voltage Max.
Hold Voltage (Min.)
Consult Factory for required conductors for higher currents
1/
Make/Break Current at Various Voltages
A
A
See next page
2,000, 1 cycle
Dropout (open) Voltage (Min.)
Inrush Current (Max.)
Holding Current (Avg.)
Inrush Time (Max.)
1/
Break Current at 320VDC
4.5A
Contact Resistance, Typ. (@200A)
Load Life
Mechanical Life
mohms 0.2
Cycles See next page
Cycles 1 million
0.5A
100ms
Contact Arrangement, auxiliary contacts
1 Form A (SPST-NO)
Aux. Contact Current, Max.
Aux. Contact Current, Min.
A
2A @ 30VDC / 3A @ 125VAC
100mA @ 8V
mA
Part Numbering System
Typical Part Number
Aux. Contact Resistance, Max.
Dielectric Withstanding Voltage
Insulation Resistance @ 500VDC
Shock, 11ms 1/2 sine, peak, operating
Vibration, sine, 80-2000Hz., peak
Operating Temperature
ohms 0.417@ 30VDC / .150 @ 125VAC
Vrms 2,200 @ sea level
megohms 100
G
G
°C
MAP200
A
R
D
E
A
Series:
2/
MAP200 = 500 Amp, 12-900VDC Contactor
20
20
Contact Form:
A = Normally Open
H = Normally Open with Aux. Contacts
-55 to +85
Coil Voltage:
R = 18-32VDC
Weight, Nominal
lb.(kg) .95 (.43)
Coil Wire Length:
A = 15.3 in (390 mm)
B = 6.0 in (152 mm)
1/
2/
3/
Main power contacts
50 at end of life
D = Coil connector on relay (requires option “E” or “X” in next step).
Use with AMP LOUVERTAC 5-192013-9. Consult factory for threaded mount
Coil Terminal Connector:
socket.
N = No connector
E = 9-pin subminiature “D” plug mounted on contactor housing
F = 9-pin subminiature “D” plug mounted on 15.3 in (390 mm) flying leads.
X = Special configuration (consult factory)
Mounting & Power Terminals:
A = Bottom Mount & Male M8 x 1.25 Thread Terminals
B = Bottom Mount & Female 1/4-20 Thread Terminals
3/
C = Bottom Mount & Plug-in Terminals
© 2004 by Tyco Electronics Corporation. All Rights Reserved.
KILOVAC, AMP, LOUVERTAC and TYCO are trademarks.
D = Bottom Mount & Female M6 x 1 Thread Terminals
Other products and company names mentioned herein may be trademarks of their
respective owners.
1
Catalog 1654857
Issued 6-04
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
UK: 44-141-810-8967
5秒后页面跳转
深入解读IR2103资料手册：引脚说明、电气参数及替换型号推荐
L7805CV手册解读：引脚说明、替代型号推荐、好坏检测
MMBT5551资料手册解读：电气参数、替换型号推荐
APW7073资料手册解读：产品特性、引脚说明、替换型号推荐
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
