D I G I T R O N S E M I C O N D U C T O R S
MAC224(A) SERIES
SILICON BIDIRECTIONAL TRIODE THYRISTORS
40 AMPERES RMS
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
RATING
SYMBOL
VALUE
UNIT
Peak Repetitive Off-State Voltage(1)
VDRM
Volts
(TJ = -40 to 125°C, ½ Sine Wave 50 to 60 Hz, Gate Open)
MAC224-4, MAC224A4
200
300
400
500
600
700
800
MAC224-5, MAC224A5
MAC224-6, MAC224A6
MAC224-7, MAC224A7
MAC224-8, MAC224A8
MAC224-9, MAC224A9
MAC224-10, MAC224A10
On-State RMS Current (TC = 75°C)(2) (Full Cycle Sine Wave 50 to 60Hz)
Peak Non-repetitive surge Current (One Full Cycle, 60Hz, TJ = 125°C)
Circuit Fusing (t = 8.3ms)
IT(RMS)
ITSM
I2t
40
350
Amps
Amps
A2s
500
Peak Gate Current (t ≤ 2 μs)
IGM
±2
Amps
Volts
Watts
Watts
°C
Peak Gate Voltage (t ≤ 2 μs)
VGM
PGM
PG(AV)
TJ
±10
Peak Gate Power (t ≤ 2 μs)
20
Average Gate Power (TC = 75°C, t ≤ 8.3ms)
Operating Junction Temperature Range
Storage Temperature Range
0.5
-40 to 125
-40 to 150
8
Tstg
⎯
°C
Mounting Torque
in. lb.
1.
2.
VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
This device is rated for use in applications subject to high surge conditions. Care must be taken to ensure proper heat sinking when the device is to be used at high sustained currents. (See
figure 1 for maximum case temperatures.)
THERMAL CHARACTERISTICS
Characteristic
Symbol
RθJC
Max
1
Unit
°C/W
°C/W
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Ambient
RθJA
60
ELECTRICAL CHARACTERISTICS (TC = 25°C and either polarity of MT2 to MT1 voltage unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
Peak Blocking Current (Rated VDRM, Gate Open)
μA
TJ = 25°C
IDRM
-
-
-
-
10
2
mA
TJ = 125°C
Peak On-State Voltage
VTM
Volts
mA
(ITM = 56 A Peak, Pulse Width ≤ 2ms, Duty Cycle ≤ 2%)
-
1.4
1.85
Gate Trigger Current (Continuous dc)
(VD = 12V, RL = 100 Ω)
IGT
MT2 (+), G(+); MT2(-), G(-); MT2(+), G(-)
MT2(-), G(+) “A” SUFFIX ONLY
-
-
25
40
50
75
Gate Trigger Voltage (Continuous dc)
(VD = 12V, RL = 100 Ω)
VGT
Volts
MT2 (+), G(+); MT2(-), G(-); MT2(+), G(-)
MT2(-), G(+) “A” SUFFIX ONLY
-
-
1.1
1.3
2
2.5
phone +1.908.245-7200
fax +1.908.245-0555
sales@digitroncorp.com
www.digitroncorp.com
144 Market Street
Kenilworth NJ 07033 USA
Rev. 20130130