MODEL: M6DBS
Euro Terminal Ultra-Slim Signal Conditioners M6D Series
RELATED PRODUCTS
• M6D series signal conditioners (Not able to supply to AC
power signal conditioners (M2 code))
INSTALLATION BASE
Functions & Features
• Power supply module (model: M6DPS1)
• Power supply module (model: M6DPS2)
• Power supply module (model: M6-PSM)
• Blank filler module (model: M6DDM)
• Backplane to collectively supply power to the M6D
modules in combination with the Power Supply Module
(model: M6DPSx or M6-PSM)
GENERAL SPECIFICATIONS
Capacity: Up to 48 modules (including power supply
module) with Extension Bases (The usable number of signal
conditioners depends on the capacity of the power supply
module. Refer to the M6-PSM specification sheets.)
Isolation: Power to ground
INSTALLATION
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail
MODEL: M6DBS–[1][2]
Weight:
ORDERING INFORMATION
• Code number: M6DBS-[1][2]
Specify a code from below for each [1] and [2].
(e.g. M6DBS-08/UL/Q)
M6DBS-08, -08P: 50 g (1.8 oz) without signal conditioners
M6DBS-08A: 80 g (2.8 oz) without signal conditioners
• Specify the specification for option code /Q
(e.g. /C01)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (power to ground)
[1] NUMBER OF SLOTS
08: 8 slots
STANDARDS & APPROVALS
EU conformity:
08P: 8 slots (for extension)
08A: 8 slots + power supply slot (for model M6-PSM)
(UL not available)
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
[2] OPTIONS (multiple selections)
Standards & Approvals
EN 50581
Approval:
blank: CE marking
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D
/UL: UL approval, CE marking
Other Options
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Only solder side of the main PWB is coated.
/C01: Silicone coating
/C02: Polyurethane coating
M6DBS SPECIFICATIONS
ES-7845 Rev.11 Page 1/5
http://www.m-system.co.jp/