MODEL: M6DDY
Euro Terminal Ultra-Slim Signal Conditioners M6D Series
POWER INPUT
DC Power
R: 24 V DC
CURRENT LOOP SUPPLY
Functions & Features
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
• 5.9-mm wide ultra-slim design
• Low profile allows the M6D module mounted in a 120-mm
deep panel
[2] OPTIONS (multiple selections)
Standards & Approvals
• Powers a two-wire transmitter and galvanically isolates its
output signal
blank: CE marking
/UL: UL approval, CE marking
Other Options
• High-density mounting
• Power indicator LED
blank: none
/Q: Option other than the above (specify the specification)
5.9 (.23)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
94
(3.70)
GENERAL SPECIFICATIONS
Connection
102
Input and output: Euro terminal (torque 0.3 N·m)
Power input: Via the Installation Base (model: M6DBS)
or Euro terminal (torque 0.3 N·m)
(4.02)
mm (inch)
Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
MODEL: M6DDY–[1]–R[2]
Zero adjustment: -2 to +2 % (front)
Span adjustment: 98 to 102 % (front)
ORDERING INFORMATION
• Code number: M6DDY-[1]-R[2]
Specify a code from below for each [1] and [2].
(e.g. M6DDY-A-R/UL/Q)
Power LED: Green light turns on when the power is supplied.
SUPPLY OUTPUT
(across the terminals 3 – 4)
Output voltage: 24 – 30 V DC with no load
18 V DC min. at 20 mA
• Specify the specification for option code /Q
(e.g. /C01)
Current rating: ≤ 22 mA DC
• Shortcircuit Protection
INPUT
Current
Current limited: 45 mA max.
Protected time duration: No limit
4 – 20 mA DC (Input resistance 249.5 Ω)
[1] OUTPUT
Current
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
A: 4 – 20 mA DC (Load resistance 550 Ω max.)
Voltage
INSTALLATION
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
Power consumption: Approx. 1 W (1.1 W for UL approval)
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Installation Base (model: M6DBS) or DIN rail
Weight: 60 g (2.1 oz)
M6DDY SPECIFICATIONS
ES-7824 Rev.10 Page 1/4
http://www.m-system.co.jp/