M610x Series Stratum 3
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Product Features
•
Stratum 3 performance with hold-over
stability (0.32 ppm) over industrial temperature
range (-40 °C to +85 °C)
•
•
•
Available in both 10 and 4/5 pads configurations
3.0 V, 3.3 V and 5.0 V versions
Low phase noise and Excellent G-Sens performance:
1.5ppb/G
N (10 Pad)
Package Option
•
Tri-state Function available
Product Description
MtronPTI’s M610x Series TCXO’s and TCVCXO’s provide network and wireless engineers with low voltage, surface
mount products with tight stability over temperature and time. MtronPTI’s unique approach to crystal compensation
enables these devices to achieve full Stratum 3 temperature stability including holdover over -40 C to +85 C. Specially
processed crystals enable the M610x to achieve consistent long-term stability and minimal frequency shift after reflow.
This processing also achieves excellent g-sensitivity (1.5 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz) makes
the M610x ideal for those design engineers working on high data-rate, low BER data communication network products.
With two standard package configurations, MtronPTI can support the original industry standard 10 pad as well as the
newer 4/5 pad topology (4 pad is without Tristate function and 5 pad is with Tristate function).
Product Applications
The M610x Series is ideally suited for a wide range of applications such as SONET, SDH, SERDES, GSM, CDMA, 3G, 4G,
Gig-Ethernet, 10G and 40G systems. Standard output for the M610x series is HCMOS compatible or clipped sinewave and
draws as little as 1.5 mA with a 3.3 volt supply at 13 MHz. This low power consumption provides a distinct advantage over
similarly specified ovenized oscillators for power-sensitive remote applications. The M610x series offers ±9.2 ppm minimum
pull range with excellent tuning linearity performance for critical PLL applications. This series is available in frequencies from
8 to 40MHz and selectively to 52MHz.
Product Ordering Information
M6100Sxxx, M6101Sxxx & M6102Sxxx - Contact factory for datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Revision: 1-5-11