MODEL: M3SWVS
5W: -5 – +5 V DC (Input resistance 1 MΩ min.)
Super-space-saving Signal Conditioners
M3S-UNIT Series
0: Specify voltage (See INPUT SPECIFICATIONS)
[2] OUTPUT 1
Current
SIGNAL TRANSMITTER
(two isolated outputs)
A: 4 – 20 mA DC (Load resistance 280 Ω max.)
D: 0 – 20 mA DC (Load resistance 280 Ω max.)
Voltage
Functions & Features
• Galvanically isolates process instrumentation signals
• Universal AC/DC power input
• High-density mounting
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
• Power indicator LED
[3] OUTPUT 2
Same range availability as Output 1
Y: None
12 (.47)
106
(4.17)
[4] POWER INPUT
AC Power
M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,
47 – 66 Hz)
110.5 (4.35)
mm (inch)
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Universal
AD: 100 – 240 V AC / 24 – 240 V DC (universal)
(Operational voltage range 90 - 264 V AC, 47 - 66 Hz /
21.6 - 264 V DC, ripple 10 %p-p max.)
MODEL: M3SWVS–[1][2][3]–[4][5]
ORDERING INFORMATION
• Code number: M3SWVS-[1][2][3]-[4][5]
Specify a code from below for each [1] through [5].
(e.g. M3SWVS-AAA-R/K/Q)
[5] OPTIONS (multiple selections)
Response Time (0 – 90 %)
blank: Standard (≤ 0.5 sec.)
• Special input range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01)
/K: Fast Response (Approx. 3.5 msec.)
Other Options
blank: none
/Q: Option other than the above (specify the specification)
[1] INPUT
Current
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
A: 4 – 20 mA DC (Input resistance 50 Ω)
B: 2 – 10 mA DC (Input resistance 100 Ω)
C: 1 – 5 mA DC (Input resistance 200 Ω)
D: 0 – 20 mA DC (Input resistance 50 Ω)
E: 0 – 16 mA DC (Input resistance 50 Ω)
F: 0 – 10 mA DC (Input resistance 100 Ω)
G: 0 – 1 mA DC (Input resistance 1000 Ω)
H: 10 – 50 mA DC (Input resistance 20 Ω)
Z: Specify current (See INPUT SPECIFICATIONS)
Voltage
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Construction: Small-sized front terminal structure
Connection: Euro type connector terminal
Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm
2
3: 0 – 1 V DC (Input resistance 1 MΩ min.)
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
5: 0 – 5 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)
Housing material: Flame-resistant resin (gray)
Isolation: Input to output 1 to output 2 to power
Zero adjustment: -2 to +2 % (front)
Span adjustment: 98 to 102 % (front)
Power LED: Green light turns on when the power is supplied.
M3SWVS SPECIFICATIONS
ES-7709 Rev.5 Page 1/4
http://www.m-system.co.jp/