M39003/09
www.vishay.com
Vishay
Solid-Electrolyte TANTALEX™ Capacitors,
Military MIL-PRF-39003/09 Qualified, Style CSR21
FEATURES
• Hermetically sealed
• Metal cased
• Axial lead
• Weibull failure rates B, C, D
• Exponential failure rates M, P, R, S
• Low ESR
• 100 ꢀ surge current test
• Tape and reel available per EIA-296 standard
STYLE, MILITARY SPECIFICATION SHEET
Style CSR21, M39003/09 MIL-PRF-39003/9
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 5.6 μF to 330 μF
Capacitance Tolerance: 5 ꢀ, 10 ꢀ, 20 ꢀ
Voltage Rating: 6 VDC to 50 VDC
DESCRIPTION
Solid-electrolyte
TANTALEX
capacitors
to
military
MIL-PRF-39003 establishes failure rates (expressed in
percent per 1000 h) based on exponential and Weibull
distribution. Care must be exercised in ordering to insure the
part number correctly identifies the desired failure rate level.
specification MIL-PRF-39003 - Exponential and Weibull
Distribution: hermetically sealed, metal cased, axial leaded
tubular capacitors manufactured as military style CSR21.
These capacitors are furnished to the requirements of the
military specification, including marking, testing and
inspection.
In addition, each order for military style CSR13, CSR21,
CSR23 capacitors requiring government inspection must
state whether inspection is to be at the destination or at the
Vishay plant. Orders requiring source inspection cannot be
shipped until this has been accomplished.
In accordance with the specification, all capacitors are
marked with the military part number (M39003/xx-xxxx)
rather than the older style designation (CSRxxxxxxxx) and
should be ordered as such. All capacitors covered by
MIL-PRF-39003 are now ordered with the military part
number as illustrated in the Part Numbering System chart.
Capacitors must not be ordered using the style number
identification.
For information on the performance characteristics of these
capacitors, please refer to the latest issue of the military
specification.
ORDERING INFORMATION
M39003
/09
-2085
B
/TR
BASIC
DOCUMENT NUMBER
SLASH SHEET
DASH NUMBER
SURGE CURRENT
OPTION LETTER
PACKAGING OPTION (1)
Indicates the Basic
Specification; in this
case MIL-PRF-39003
Indicates the
Specification Sheet
of the Basic Military
Specification
Taken from Ratings
table of the
Specification Sheet
Blank = standard, +25 °C,
after Weibull
Blank = bulk
/TR = tape and reel, full reel
/HR = tape and reel, half reel
/PR = tape and reel, partial reel
/RR = tape and reel,
B = -55 °C and +85 °C,
after Weibull
C = -55 °C and +85 °C,
before Weibull
E = -55 °C and +85 °C,
after Weibull, high
option R, full reel
/WR = tape and reel,
option W, full reel
temperature solder
F = -55 °C and +85 °C,
before Weibull, high
temperature solder
H = +25 °C, after Weibull,
high temperature solder
Note
(1)
See detailed packaging information following the Standard Ratings table
Revision: 05-Aug-2020
Document Number: 40158
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000