LIN DOC #: 5213
LX5213
9-LINE LOW CAPACITANCE, µPOWER SCSI TERMINATOR
H E
N F I N I T E
O W E R O F
N N O V A T I O N
P R O D U C T I O N D A T A S H E E T
DESCRIPTION
KEY FEATURES
■ 3.5pF OUTPUT CAPACITANCE DURING
The LX5213 is a nine-line active terminator
for the SCSI parallel bus. This SCSI standard
recommends active termination at both ends
of the SCSI bus.
sumes only 600µA of current, which is the
DISCONNECT
lowest enabled supply current of any termi-
nator available on the market today.
Linfinity's proprietary BiCMOS low dropout
regulator architecture enables this unique
and very efficient operating characteristic.
The LX5213 also offers a precisely trimmed
channel output current specified to a 5%
tolerance. The maximum value of the output
current is trimmed as closely as possible to
the SCSI standard maximum specification to
give the highest possible noise margin for
fast SCSI operation. And the LX5213 sinks
up to 150mA of current, making it compatible
with today's fast active negation drivers.
The LX5213 is a superior, pin-for-pin re-
placement for a variety of industry products
■ 60µA SUPPLY CURRENT IN DISCON-
NECT MODE
During disconnect mode, the LX5213 re-
quires a meager 60µA of supply current while
offering only 3.5pF of output capacitance.
To enter this low-power mode, the discon-
nect pin can be left open (floating) or driven
high, thereby disconnecting the terminating
resistors and placing the internal low dropout
regulator into low-power mode. In discon-
nect mode, each termination line presents
a high impedance to the SCSI bus with the
overall effect being to preserve high-signal
integrity and yield subsequent reliable, error-
free communications.
■ 600µA SUPPLY CURRENT DURING
NORMAL OPERATION
■ 150mA SINK CURRENT FOR ACTIVE
NEGATION
■ LOGIC COMMAND DISCONNECTS ALL
TERMINATION LINES
■ CURRENT LIMIT AND THERMAL
PROTECTION
■ COMPATIBLE WITH SCSI 1, 2 AND 3
STANDARDS
■ CONSULT FACTORY FOR APPLICATION
TEST REPORT: 5213TR
During normal operation, the LX5213 con-
such as the UC5603 and UC5613.
IMPORTANT: For the most current data, consult LinFinity's web site:
PRODUCT HIGHLIGHT
RECEIVING WAVEFORM - 10MHZ DRIVING WAVEFORM - 10MHZ
NOTE:
For An In-Depth
Receiver
Driver
1 Meter, AWG 28
Discussion On Applying
SCSI, Request Linfinity
Application Note:
"Understanding The
Single-Ended SCSI Bus"
LX5213
LX5213
LX5268
LX5268
PACKAGE ORDER INFORMATION
Plastic DIP
16-pin
Plastic TSSOP
24-pin, Power
Plastic SOIC
16-pin, Power
TA (°C)
0 to 70
LX5213CN
LX5213CPWP
LX5213CDP
Note: All surface-mount packages are available in Tape & Reel.
Append the letter "T" to part number. (i.e. LX5213CDPT)
Copyright © 1997
Rev. 1.9 7/97
1
11861 WESTERN AVENUE, GARDEN GROVE, CA. 92841, 714-898-8121, FAX: 714-893-2570