LIN DOC #: 5202
LX5202
18-LI N E , µPO W E R SCSI TE R M I N AT O R
T H E I N F I N I T E P O W E R O F I N N O V A T I O N
P R O D U C T I O N D A T A S H E E T
DESCRIPTION
KEY FEATURES
■ 6pF OUTPUT CAPACITANCE DURING
The LX5202 is an eighteen-line active termi-
nator for the SCSI parallel bus. This SCSI
standard recommends active termination at
both ends of the SCSI bus.
sumes only 800µA of current, which is the
lowest enabled supply current of any termi-
DISCONNECT
■ 60µA SUPPLY CURRENT IN DISCON-
nator available on the market today.
Linfinity's proprietary BiCMOS low dropout
regulator architecture enables this unique
and very efficient operating characteristic.
The LX5202 also offers a precisely trimmed
channel output current specified to a 5%
tolerance. The maximum value of the output
current is trimmed as closely as possible to
the SCSI standard maximum specification to
give the highest possible noise margin for
fast SCSI operation. And the LX5202 sinks
up to 200mA of current making it compatible
with today's fast active negation drivers.
The LX5202 is a superior, pin-for-pin re-
placement for a variety of industry products
such as the UC5601 and UC5602.
NECT MODE
During disconnect mode, the LX5202 re-
quires a meager 60µA of supply current while
offering only 6pF of output capacitance. To
enter this low-power mode, the disconnect
pin can be left open (floating) or driven high,
thereby disconnecting the terminating resis-
tors and placing the internal low dropout
regulator into low-power mode. In discon-
nect mode, each termination line presents
a high impedance to the SCSI bus with the
overall effect being to preserve high signal
integrity and yield subsequent reliable, error-
free communications.
■ 800µA SUPPLY CURRENT DURING
NORMAL OPERATION
■ 200mA SINK CURRENT FOR ACTIVE
NEGATION
■ LOGIC COMMAND DISCONNECTS ALL
TERMINATION LINES
■ CURRENT LIMIT AND THERMAL
PROTECTION
■ COMPATIBLE WITH SCSI 1, 2 AND 3
STANDARDS
■ CONSULT FACTORY FOR APPLICATION
TEST REPORT: 5202TR
During normal operation, the LX5202 con-
IMPORTANT: For the most current data, consult LinFinity's web site: http://www.linfinity.com.
PRODUCT HIGHLIGHT
RECEIVING WAVEFORM - 5MHZ
DRIVING WAVEFORM - 5MHZ
Receiver
Driver
1 Meter, AWG 28
LX5202
LX5202
NOTE:
For An In-Depth
LX5268
LX5268
Discussion On Applying
SCSI, Request Linfinity
Application Note:
"Understanding The
Single-Ended SCSI Bus"
PACKAGE ORDER INFO
Plastic SOWB
28-pin, Power
TA (°C)
DWP
0 to 70
LX5202CDWP
Note: All surface-mount packages are available in Tape & Reel.
Append the letter "T" to part number. (i.e. LX5202CDWPT)
L I N F I N I T Y M I C R O E L E C T R O N I C S I N C .
11861 WESTERN AVENUE, GARDEN GROVE, CA. 92841, 714-898-8121, FAX: 714-893-2570
Copyright © 1998
Rev. 1.9 3/98
1