Ordering number : ENA1798D
Monolithic Linear IC
For Car Audio Systems
LV47004P
4-Channel BTL Power Amplifier
Overview
The LV47004P is the IC for 4-channel BTL power amplifier that is developed for car audio system.
Pch DMOS in the upper side of the output stage and Nch DMOS in the lower side of the output stage are complimentary.
High power and high quality sound are realized by that.
This IC incorporate various functions (standby switch, muting function, and various protection circuit) necessary for car
audio system. Also, it has a self-diagnosis function.
Functions
• High output : P max = 41W (typical) (V
= 15.2V, f = 1kHz, R = 4Ω, Max power)
L
O
CC
CC
CC
: P max = 24W (typical) (V
= 14.4V, f = 1kHz, THD = 10%, R = 4Ω)
O
L
: P max = 17W (typical) (V
= 14.4V, f = 1kHz, THD = 1%, R = 4Ω)
L
O
• Built-in muting function (pin 22)
• Built-in Standby switch (pin 4)
• Built-in Self-diagnosis function (pin 25) :
Signal output in case of output offset detection, shorting to V , shorting to ground, and load shorting.
CC
• Electric mirror noise decrease
• Built-in various protection circuit (shorting to ground, shorting to V , load shorting, over voltage and thermal shut
CC
down)
• No external anti-oscillation part necessary.
Note 1 : Please do not mistake connection.
A wrong connection may produce destruction, deterioration and damage for the IC or equipment.
Note 2 : The protective circuit function is provided to temporarily avoid abnormal state such as incorrect output connection.
But, there is no guarantee that the IC is not destroyed by the accident.
The protective function do not operate of the operation guarantee range. If the outputs are connected incorrectly, IC
destruction may occur when used outside of the operation guarantee range.
Note 3 : External parts, such as the anti-oscillation part, may become necessary depending on the set condition. Check their
necessity for each set.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
's products or
equipment.
42512 SY/41812 SY/O2611 SY 20110930-S00012/60811 SY/63010 SY 20100618-S00017 No.A1798-1/11
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
