IL41050
Isolated High-Speed CAN Transceiver
Functional Diagram
Features
• Single-chip isolated CAN/DeviceNet transceiver
• Fully compliant with the ISO 11898 CAN standard
• Best-in-class loop delay (180 ns)
• 3.0 V to 5.5 V input power supplies
S
CANH
TxD
RxD
• >110-node fan-out
• High speed (up to 1 Mbps)
• 2,500 VRMS isolation (1 minute)
CANL
• Very low Electromagnetic Emission (EME)
• Differential signaling for excellent Electromagnetic Immunity (EMI)
• 30 kV/µs transient immunity
IL41050
• Silent mode to disable transmitter
• Unpowered nodes do not disturb the bus
• Transmit data (TxD) dominant time-out function
• Edge triggered, non-volatile input improves noise performance
• Bus pin transient protection for automotive environment
• Thermal shutdown protection
• Short-circuit protection for ground and bus power
• −55°C to +125°C operating temperature
• 0.15" and 0.3" and 16-pin JEDEC-standard SOIC packages
• UL1577 and IEC 61010-2001 approved
TxD(1)
VDD2 (V)
S
CANH CANL Bus State RxD
4.75 to 5.25
4.75 to 5.25
4.75 to 5.25
<2V (no pwr)
↓
X
↑
Low(2) High
Low
Dominant Low
Recessive High
Recessive High
High VDD2/2 VDD2/2
X
X
X
VDD2/2 VDD2/2
X
0<V<2.5 0<V<2.5 Recessive High
0<V<2.5 0<V<2.5 Recessive High
2>VDD2<4.75 >2V
Table 1. Function table.
Applications
• Noise-critical CAN
• Partially-powered CAN
• DeviceNet
Notes:
1. TxD input is edge triggered: ↑ = Logic Lo to Hi, ↓ = Hi to Lo
2. Valid for logic state as described or open circuit
X = don’t care
• Factory automation
Description
The IL41050 is a galvanically isolated, high-speed CAN (Controller
Area Network) transceiver, designed as the interface between the
CAN protocol controller and the physical bus. The IL41050 provides
isolated differential transmit capability to the bus and isolated
differential receive capability to the CAN controller via NVE’s
patented* IsoLoop spintronic Giant Magnetoresistance (GMR)
technology.
Advanced features facilitate reliable bus operation. Unpowered nodes
do not disturb the bus, and a unique non-volatile programmable
power-up feature prevents unstable nodes. The devices also have a
hardware-selectable silent mode that disables the transmitter.
Designed for harsh CAN and DeviceNet environments, IL41050T
transceivers have transmit data dominant time-out, bus pin transient
protection, thermal shutdown protection, and short-circuit protection,
Unique edge-triggered inputs improve noise performance. Unlike
optocouplers or other isolation technologies, IsoLoop isolators have
indefinite life at high voltage.
IsoLoop® is a registered trademark of NVE Corporation.
*U.S. Patent number 5,831,426; 6,300,617 and others.
REV. F
NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617
Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com
©NVE Corporation