LT1801/LT1802
Dual/Quad 80MHz, 25V/µs
Low Power Rail-to-Rail Input and
Output Precision Op Amps
U
FEATURES
DESCRIPTIO
The LT®1801/LT1802 are dual/quad, low power, high
■
Gain Bandwidth Product: 80MHz
Input Common Mode Range Includes Both Rails
Output Swings Rail-to-Rail
Low Voltage Operation: Single or Split Supplies
2.3V to 12.6V
■
speed rail-to-rail input and output operational amplifiers
with excellent DC performance. The LT1801/LT1802 fea-
ture reduced supply current, lower input offset voltage,
lower input bias current and higher DC gain than other
devices with comparable bandwidth.
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Low Quiescent Current: 2mA/Amplifier Max
Input Offset Voltage: 350µV Max
Input Bias Current: 250nA Max
3mm × 3mm × 0.8mm DFN Package
Large Output Current: 50mA Typ
Low Voltage Noise: 8.5nV/√Hz Typ
Slew Rate: 25V/µs Typ
Common Mode Rejection: 105dB Typ
Power Supply Rejection: 97dB Typ
Open-Loop Gain: 85V/mV Typ
Typically, the LT1801/LT1802 have an input offset voltage
of less than 100µV, an input bias current of less than 50nA
and an open-loop gain of 85 thousand.
The LT1801/LT1802 have an input range that includes
both supply rails and an output that swings within 20mV
of either supply rail to maximize the signal dynamic range
in low supply applications.
The LT1801/LT1802 maintain their performance for sup-
plies from 2.3V to 12.6V and are specified at 3V, 5V and
±5V supplies. The inputs can be driven beyond the sup-
plies without damage or phase reversal of the output.
Operating Temperature Range: –40°C to 85°C
LT1801 is Available in 8-Lead SO, MS8 and DFN
Packages
■
LT1802 is Available in 14-Lead SO Package
The LT1801 is available in the MS8, SO-8 and the 3mm ×
3mm× 0.8mmdualfinepitchleadlesspackage(DFN)with
the standard dual op amp pinout. The LT1802 features the
standardquadopampconfigurationandisavailableinthe
14-pin plastic SO package. The LT1801/LT1802 can be
used as plug-in replacements for many op amps to im-
prove input/output range and performance.
U
APPLICATIO S
■
Low Voltage, High Frequency Signal Processing
Driving A/D Converters
Rail-to-Rail Buffer Amplifiers
■
■
■
Active Filters
■
Video Line Driver
, LT, LTC and LTM are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
For a single version of these amplifiers, see the LT1800
data sheet.
U
1MHz Filter Frequency Response
TYPICAL APPLICATIO
3V, 1MHz, 4th Order Butterworth Filter
0
–20
–40
–60
–80
909Ω
2.67k
220pF
47pF
1.1k
2.21k
470pF
22pF
909Ω
–
3V
V
IN
/2
1.1k
–
1/2 LT1801
+
1/2 LT1801
V
OUT
–100
–120
+
V
S
18012 TA01
1k
10k
100k
1M
10M
100M
FREQUENCY (Hz)
18012 TA02
18012fb
1