LT1801/LT1802
Dual/Quad 80MHz, 25V/µs
Low Power Rail-to-Rail Input and
Output Precision Op Amps
FEATURES
DESCRIPTION
TheLT®1801/LT1802aredual/quad,lowpower,highspeed
n
Gain Bandwidth Product: 80MHz
Input Common Mode Range Includes Both Rails
Output Swings Rail-to-Rail
Low Voltage Operation: Single or Split Supplies
2.3V to 12.6V
n
rail-to-rail input and output operational amplifiers with
excellent DC performance. The LT1801/LT1802 feature
reduced supply current, lower input offset voltage, lower
input bias current and higher DC gain than other devices
with comparable bandwidth.
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Low Quiescent Current: 2mA/Amplifier Max
Input Offset Voltage: 350μV Max
Input Bias Current: 250nA Max
3mm × 3mm × 0.8mm DFN Package
Large Output Current: 50mA Typ
Low Voltage Noise: 8.5nV/√Hz Typ
Slew Rate: 25V/μs Typ
Common Mode Rejection: 105dB Typ
Power Supply Rejection: 97dB Typ
Open-Loop Gain: 85V/mV Typ
Typically, the LT1801/LT1802 have an input offset voltage
of less than 100μV, an input bias current of less than 50nA
and an open-loop gain of 85 thousand.
The LT1801/LT1802 have an input range that includes
both supply rails and an output that swings within 20mV
of either supply rail to maximize the signal dynamic range
in low supply applications.
The LT1801/LT1802 maintain their performance for sup-
plies from 2.3V to 12.6V and are specified at 3V, 5V and
5Vsupplies.Theinputscanbedrivenbeyondthesupplies
without damage or phase reversal of the output.
Operating Temperature Range: –40°C to 85°C
LT1801 is Available in 8-Lead SO, MS8 and DFN
Packages
n
LT1802 is Available in 14-Lead SO Package
The LT1801 is available in the MS8, SO-8 and the 3mm
× 3mm × 0.8mm dual fine pitch leadless package (DFN)
withthestandarddualopamppinout.TheLT1802features
the standard quad op amp configuration and is available
in the 14-pin plastic SO package. The LT1801/LT1802 can
be used as plug-in replacements for many op amps to
improve input/output range and performance.
APPLICATIONS
n
Low Voltage, High Frequency Signal Processing
n
Driving A/D Converters
n
Rail-to-Rail Buffer Amplifiers
n
Active Filters
Video Line Driver
n
For a single version of these amplifiers, see the LT1800
data sheet.
L, LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other
trademarks are the property of their respective owners.
1MHz Filter Frequency Response
TYPICAL APPLICATION
0
–20
3V, 1MHz, 4th Order Butterworth Filter
909Ω
2.67k
220pF
47pF
–40
1.1k
2.21k
470pF
22pF
909Ω
–60
–
3V
V
IN
1.1k
–
–80
1/2 LT1801
+
1/2 LT1801
+
V
OUT
–100
–120
V /2
S
18012 TA01
1k
10k
100k
1M
10M
100M
FREQUENCY (Hz)
18012 TA02
18012fc
1