LT1019
Precision Reference
U
FEATURES
DESCRIPTIO
■
Tight Initial Output Voltage: <0.05%
The LT®1019 is a third generation bandgap voltage refer-
ence utilizing thin film technology and a greatly improved
curvature correction technique. Wafer level trimming of
both reference and output voltage combines to produce
very low TC and tight initial output voltage tolerance.
■
Ultralow Drift: 3ppm/°C Typical
■
Series or Shunt Operation
Curvature Corrected
Ultrahigh Line Rejection: ≈0.5ppm/V
Low Output Impedance: ≈0.02Ω
Plug-In Replacement for Present References
Available at 2.5V, 4.5V, 5V, and 10V
100% Noise Tested
Temperature Output
Industrial Temperature Range in SO-8
Available in 8-Lead N8 and S8 Packages
■
■
■
The LT1019 can both sink and source up to 10mA and can
be used in either the series or shunt mode, allowing the
reference to operate with positive or negative output
voltages without external components. Minimum input/
outputvoltageislessthan1Vintheseriesmode,providing
improved tolerance of low line conditions and excellent
line regulation.
■
■
■
■
■
■
U
APPLICATIO S
The LT1019 is available in four voltages: 2.5V, 4.5V, 5V
and 10V. It is a direct replacement for most bandgap
references presently available including AD580, AD581,
REF-01, REF-02, MC1400, MC1404 and LM168.
■
Negative Shunt References
■
A/D and D/A Converters
■
Precision Regulators
Constant Current Sources
V/F Converters
Bridge Excitation
, LTC and LT are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
■
■
■
U
TYPICAL APPLICATION
Output Voltage Drift
Ultralinear Strain Gauge
15V
357Ω*
0.5W
5V
1.003
R3
10ppm/°C
1.002
1.001
1.000
IN
OUT
2M
FULL TEMP RANGE “BOX”
350Ω
LT1019-5
GND
BRIDGE
R2
20k
–
LT1019
CURVE
+
–
A1†
LT1637
A2
LT1001
R4
20k
GAIN = 100
+
0.999
0.998
0.997
5ppm/°C
0°C TO 70°C “BOX”
ACTIVE
ELEMENT
R5
UNCOMPENSATED
“STANDARD” BANDGAP
DRIFT CURVE
2M
R6**
2M
50
TEMPERATURE (˚C)
100 125
–50 –25
0
25
75
LT1019 • TA01
–5V
357Ω*
0.5W
*REDUCES REFERENCE AND AMPLIFIER
1019 TA02
LOADING TO ≈0.
**IF R6 = R3, BRIDGE IS NOT LOADED BY R2 AND R4.
–15V
†A1 V AND DRIFT ARE NOT CRITICAL BECAUSE A2
OS
ACTS AS A DIFFERENTIAL AMPLIFIER.
1019fd
1