Varistors Datasheet
LSP05G European Version Module Series
LED Lighting Surge Protection Module
RoHS
Description
Littelfuse’s LSP05G European version thermally protected Surge
Protective Device is a self-protected device specially designed to
be used in outdoor and commercial LED lighting fixtures for
transient overvoltage protection. It has been developed with
Littelfuse’s thermally protected varistor technology. Its built-in
thermal disconnect function provides additional protection to
prevent catastrophic failure and fire hazard even under extreme
circumstances of varistor end-of-life or sustained over-voltage
conditions. It also provides high line-to-earth/ground resistance,
facilitating faster production line testing.
LSP05G series connected option allows clear indication of thermal
fault protection by disconnecting power to the luminaire, thereby
signaling SPD module replacement. The LSP05G Surge Protective
Device facilitates product compliance to IEEE C62.41.2 Location
Category C Low.
Additional Information
Features
■ Maximum Discharge
■ Compact form factor
Current 10kA, 8/20µs
with mounting tabs
■ Meets ANSI C136.2
■ 240Vac and 277Vac are
available for Class I and
Class II installation based
on IEC luminaire protection
classes and are marked CE
Enhanced Level 10kV/5kA
and IEEE C62.41.2 Location
Category C Low Exposure
Resources
Accessories
Samples
■ Thermally Protected
Varistor technology
■ Series connected
– Varistor thermal
protection indication
by removal of power
to luminaire
Agency Approvals
■ Parallel and Series
Connected SPD Options
Agency
Standard
Agency File Number
■ IP66 Water-proof
and Dust-proof
UL1449
E320116
■ High line-to-earth/
ground resistance
■ UL1449 Recognized
IEC 61643-11*
IEC 61643-11*
NL-37684 and NL-40516
■ IEC 61643-11 Class II and EN
61643-11Type 2 compliant.
■ RoHS compliant
31-122332 and 31-122333
* For 240V and 277V Series connection verison, respectively
■ IEC CB Scheme Certificate
NL-37684 available for 240V
and NL-40516 for 277V
Applications
■ Outdoor and Commercial
■ Wall wash lighting
LED Lighting
■ Parking garage lighting
■ Flood lighting
■ Roadway lighting
■ Traffic lighting
■ Digital signage
■ Tunnel lighting
■ Street lighting
Absolute Maximum Ratings
For ratings of individual members of a series, see Device Ratings and Specifications chart
■
LSP05G Series
Units
Continous:
Max AC Voltage Range (VM(AC)RMS
Continuous Current
)
275 to 320
10
V
A
Transient:
Maximum Discharge Current, 8/20μs Waveform (Imax
Nominal Discharge Current, 8/20µs Waveform (In)
)
10,000
5,000
A
A
Operating Ambient Temperature Range (TA)
Storage Temperature Range (TSTG
Isolation Voltage Capability (When the thermal disconnect opens)
Insulation Resistance
-45 to +85
-45 to +90
600
°C
°C
V
)
>1,000
MΩ
Caution: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the
operational sections of this specification is not implied.
© 2023 Littelfuse, Inc.
Specifications are subject to change without notice.
1
Revised: GD. 05/04/23