LS4301-9PD2

更新时间： 2024-11-06 09:31:43

品牌	Logo	应用领域
BEL		电源电路
页数	文件大小	规格书
27页	598K
描述
AC-DC Power Factor Correction Module, 1 Output, 100W, Hybrid, HEAT SINK, METAL, CASE S02, MODULE

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

LS4301-9PD2 数据手册

Cassette Style

100 Watt AC-DC Converters

S Series PFC

100 Watt AC-DC Converters with PFC

S Series

Input voltage range from 85...264 V AC

1 or 2 isolated outputs up to 48 V DC

4 kV AC I/O electric strength test voltage

• Universal input voltage range

• Power factor >0.95, harmonics <IEC/EN 61000-3-2

• Input over- and undervoltage lock-out

• Efﬁcient input ﬁlter and built-in surge and transient

suppression circuitry

• Fully isolated outputs

• Outputs overload, open- and short-circuit proof

• No derating over entire operating temperature range

Safety according to IEC/EN 60950

LGA

111

4.4"

3 U

168

2.4"

6.6"

12 TE

Summary

The S 4000/S 5000 series of AC-DC converters represents

a ﬂexible range of power supplies for use in advanced elec-

tronic systems. Features include full power factor correc-

tion, high efﬁciency, high reliability, low output voltage noise

and excellent dynamic response to load/line changes.

agencies LGA (Germany) and UL (USA). The UL Mark for

Canada has been ofﬁcially recognized by regulatory au-

thorities in provinces across Canada.

The converter inputs are protected against surges and tran-

sients occurring at the source lines. An input over- and

undervoltage lock-out circuitry disables the outputs if the

input voltage is outside the speciﬁed range. Inrush current

limitation is included preventing circuit breakers and fuses

from being damaged at switch-on.

The case design allows operation at nominal load up to

71°C in a free air ambient temperature. If forced cooling is

provided, the ambient temperature may exceed 71°C but

the case temperature must remain below 95°C under all

conditions.

A temperature sensor generates an inhibit signal which

disables the outputs if the case temperature T_Cexceeds

the limit. The outputs are automatically re-enabled when

the temperature drops below the limit.

All outputs are overload, open- and short-circuit proof and

are protected against overvoltages by means of a built-in

suppressor diode. The outputs can be inhibited by a logic

signal applied to the connector pin 18 (i). If the inhibit func-

tion is not used pin 18 must be connected to pin 14 to en-

able the outputs.

Various options are available to adapt the converters to in-

dividual applications.

The modules may either be plugged into 19" rack systems

according to DIN 41494, or be chassis mounted.

LED indicators display the status of the converter and allow

visual monitoring of the system at any time.

Full input to output, input to case, output to case and output

to output isolation is provided. The modules are designed

and built according to the international safety standards

IEC/EN 60950 and have been approved by the safety

Important:

These products are intended to replace the LS 1000 and

LS 2000 in order to comply with IEC/EN 61000-3-2.

Table of Contents

Page

Summary .......................................................................... 1

Type Survey and Key Data .............................................. 2

Type Key .......................................................................... 2

Functional Description...................................................... 3

Electrical Input Data ......................................................... 4

Electrical Output Data ...................................................... 6

Auxiliary Functions ......................................................... 11

Electromagnetic Compatibility (EMC) ............................ 15

Immunity to Environmental Conditions........................... 17

Mechanical Data ............................................................ 18

Safety and Installation Instructions ................................ 19

Description of Options.................................................... 22

Accessories.................................................................... 27

Edition 01/01.2001

1/27

12 3 4 5 6 7...27

中文翻译

下载PDF

与LS4301-9PD2相关器件

型号	品牌	获取价格	描述	数据表
LS4301-9PD2TB1	BEL	获取价格	AC-DC Power Factor Correction Module, 1 Output, 100W, METAL, CASE S02, MODULE
LS4301-9PD2TB2	BEL	获取价格	AC-DC Power Factor Correction Module, 1 Output, 100W, Hybrid, METAL, CASE S02, MODULE
LS4301-9PD3	BEL	获取价格	AC-DC Power Factor Correction Module, 1 Output, 100W, Hybrid, HEAT SINK, METAL, CASE S02,
LS4301-9PD3B2	BEL	获取价格	AC-DC Power Factor Correction Module, 1 Output, 100W, Hybrid, METAL, CASE S02, MODULE
LS4301-9PD3T	BEL	获取价格	AC-DC Power Factor Correction Module, 1 Output, 100W, HEAT SINK, METAL, CASE S02, MODULE
LS4301-9PD3TB1	BEL	获取价格	AC-DC Power Factor Correction Module, 1 Output, 100W, METAL, CASE S02, MODULE
LS4301-9PD4	BEL	获取价格	AC-DC Power Factor Correction Module, 1 Output, 100W, Hybrid, HEAT SINK, METAL, CASE S02,
LS4301-9PD4T	BEL	获取价格	AC-DC Power Factor Correction Module, 1 Output, 100W, HEAT SINK, METAL, CASE S02, MODULE
LS4301-9PD6	BEL	获取价格	AC-DC Power Factor Correction Module, 1 Output, 100W, Hybrid, HEAT SINK, METAL, CASE S02,
LS4301-9PD6TB2	BEL	获取价格	AC-DC Power Factor Correction Module, 1 Output, 100W, Hybrid, METAL, CASE S02, MODULE

与LS4301-9PD2相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

14
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

10
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

36
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

31

产品中心

服务支持

精选活动

关于我们

帮助中心

LS4301-9PD2

LS4301-9PD2 数据手册

与LS4301-9PD2相关器件

与LS4301-9PD2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

LS4301-9PD2

LS4301-9PD2 数据手册

与LS4301-9PD2相关器件

与LS4301-9PD2相关文章

您还可以找

您在本页遇到什么问题？