Document 1540-1
Shielded Power Inductors
–
LPS4040
Halogen
Free
• Very low DCR; excellent current handling
• 4.0 × 4.0 mm footprint; less than 4 mm tall
• AEC-Q200 Grade 1 (–40°C to +125°C)
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
AEC
+
Q200 125°C
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 200 mg
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 500/7″ reel; 1500/13″ reel Plastic tape: 12 mm wide,
0.30 mm thick, 8 mm pocket spacing, 4.32 mm pocket depth
Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5
20%
drop
Irms (A)6
DCR
max3
(Ohms)
SRF
typ4
(MHz)
Inductance2
20% (µH)
10%
drop
30%
drop
20°C
40°C
rise
Part number1
rise
LPS4040-223MR_
LPS4040-683MR_
LPS4040-823MR_
LPS4040-104MR_
LPS4040-124MR_
22
68
82
100
120
0.210
0.410
0.465
0.475
0.530
24.0
9.50
8.90
8.60
7.30
0.620
0.440
0.370
0.350
0.330
0.780
0.490
0.420
0.380
0.360
0.830
0.510
0.440
0.400
0.380
0.850
0.700
0.650
0.560
0.500
1.200
0.920
0.880
0.820
0.740
LPS4040-154MR_
LPS4040-224MR_
LPS4040-334MR_
LPS4040-474MR_
LPS4040-564MR_
150
220
330
470
560
0.680
0.880
1.40
2.16
2.35
6.10
4.80
4.10
2.90
2.80
0.275
0.230
0.190
0.150
0.140
0.305
0.250
0.205
0.170
0.160
0.320
0.265
0.215
0.180
0.165
0.490
0.430
0.360
0.270
0.240
0.650
0.580
0.480
0.370
0.330
LPS4040-684MR_
LPS4040-105MR_
LPS4040-155MR_
LPS4040-185MR_
LPS4040-225MR_
680
3.00
4.02
6.23
7.77
8.80
2.60
2.00
1.65
1.49
1.36
0.130
0.105
0.082
0.074
0.068
0.145
0.115
0.092
0.084
0.078
0.150
0.120
0.098
0.090
0.082
0.220
0.200
0.160
0.140
0.125
0.300
0.270
0.220
0.190
0.170
1000
1500
1800
2200
LPS4040-335MR_
LPS4040-475MR_
LPS4040-565MR_
3300
4700
5600
16.4
22.3
30.0
1.10
0.900
0.770
0.058
0.046
0.042
0.064
0.054
0.048
0.068
0.056
0.051
0.100
0.080
0.070
0.140
0.110
0.100
1. Please specify termination and packaging codes:
LPS4040-565MRC
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
Inductance at 1 MHz is the same for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its
value without current.
Termination: R=RoHS compliant matte tin over nickel over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-
RoHS tin-lead (63/37).
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings.
Packaging: C=7″ machine-ready reel. EIA-481 embossed plastic
tape (500 parts per full reel). Quantities less than full
reel available: in tape (not machine ready) or with
leader and trailer ($25 charge).
Click for temperature derating information.
7. Electrical specifications at 25°C.
D=13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (1500 parts per
full reel).
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
Document 1540-1 Revised 11/16/21
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2021
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.