Document 433-1
Shielded Power Inductors
–
LPS4012
• Very low DCR; excellent current handling
• 4.0 × 4.0 mm footprint; less than 1.2 mm tall
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 54 – 64 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85ꢀ relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.25 mm thick, 8 mm pocket spacing, 1.32 mm pocket depth
Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
DCR
SRF
Inductance2 max3
typ4 10% 20% 30% 20°C 40°C
LPS4012-682MRC
Termination: R=RoHS compliant matte tin over
nickel over silver.
Part number1
(µH)
(Ohms) (MHz) drop drop drop rise rise
LPS4012-331MR_
LPS4012-681MR_
LPS4012-102NR_
LPS4012-152MR_
LPS4012-222MR_
0.33 20ꢀ 0.025 375
0.68 20ꢀ 0.055 220
1.0 30ꢀ 0.060 180
1.5 20ꢀ 0.070 140
2.2 20ꢀ 0.100 115
5.2
3.5
2.8
2.6
2.3
5.4
3.6
2.9
2.7
2.4
5.5
3.7
3.0
2.8
2.5
2.2
1.8
1.7
1.6
1.2
3.0
2.4
2.4
2.2
1.75
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
LPS4012-332MR_
LPS4012-472MR_
LPS4012-562MR_
LPS4012-682MR_
3.3 20ꢀ 0.100 100
1.3
1.6
1.5
1.3
1.4
1.7
1.6
1.3
1.4
1.8
1.6
1.4
1.1
1.45 2.00
1.10 1.45
0.85 1.10
0.80 0.98
0.55 0.75
B=Less than full reel. In tape, but not
machine ready.
4.7 20ꢀ 0.175
5.6 20ꢀ 0.260
6.8 20ꢀ 0.340
70
60
55
40
To have a leader and trailer added
($25 charge), use code letter C
instead.
LPS4012-103MR_ 10 20ꢀ
0.350
0.98 1.0
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
LPS4012-153MR_ 15 20ꢀ
LPS4012-223MR_ 22 20ꢀ
LPS4012-333MR_ 33 20ꢀ
LPS4012-473MR_ 47 20ꢀ
LPS4012-683MR_ 68 20ꢀ
0.550
0.600
0.825
1.40
30
25
22
19
15
0.79 0.82 0.84 0.53 0.73
0.74 0.78 0.79 0.52 0.70
0.45 0.47 0.48 0.46 0.61
0.35 0.37 0.38 0.40 0.52
0.30 0.32 0.33 0.35 0.46
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same for
parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
1.70
LPS4012-104MR_ 100 20ꢀ
LPS4012-124MR_ 120 20ꢀ
LPS4012-154MR_ 150 20ꢀ
LPS4012-184MR_ 180 20ꢀ
LPS4012-224MR_ 220 20ꢀ
2.40
3.30
3.50
5.00
5.20
12
0.24 0.26 0.27 0.30 0.40
11.5 0.23 0.24 0.25 0.27 0.36
10.0 0.21 0.22 0.23 0.25 0.32
8.0 0.18 0.19 0.20 0.23 0.29
7.0 0.15 0.16 0.17 0.21 0.27
LPS4012-334MR_ 330 20ꢀ
7.20
7.0 0.14 0.14 0.15 0.17 0.225
4.0 0.10 0.11 0.12 0.13 0.175
3.5 0.10 0.105 0.115 0.11 0.140
3.0 0.10 0.105 0.110 0.11 0.135
3.0 0.090 0.095 0.095 0.105 0.132
LPS4012-474MR_ 470 20ꢀ 10.0
LPS4012-564MR_ 560 20ꢀ 12.5
LPS4012-684MR_ 680 20ꢀ 13.5
LPS4012-824MR_ 820 20ꢀ 20.0
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Coilcraft Designer’s Kit C392 contains samples
of 0.80 µH to 33 µH parts (3 each) from LPS3008,
LPS3010 and LPS3015. Kit C401 contains samples
of 0.56 µH to 33 µH parts (3 each) from LPS4012
and LPS4018. Kit C402 contains samples of 220 µH
to 3300 µH parts (3 each) from all five series. For
details of kit contents and to order, contact Coilcraft
or visit http://order.coilcraft.com.
LPS4012-105MR_ 1000 20ꢀ 21.5
LPS4012-155MR_ 1500 20ꢀ 30.0
LPS4012-185MR_ 1800 20ꢀ 35.0
LPS4012-225MR_ 2200 20ꢀ 42.0
3.0 0.080 0.090 0.095 0.100 0.130
2.5 0.080 0.090 0.090 0.087 0.115
2.0 0.079 0.085 0.087 0.075 0.100
1.0 0.079 0.083 0.085 0.070 0.090
Document 433-1 Revised 08/01/13
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.