Document 354 -1
SMT Power Inductors
–
LPO4815 Series
• Very low profile - only 1.5 mm high!
• Handles current up to 1.9 Amps rms
Designer’s Kit C376 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 70.0 – 78.5 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 1000/7″reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.6 mm pocket depth
Recommended pick and place nozzle OD: 4.6 mm; ID: ≤ 2.3 mm
PCB washing Only pure water or alcohol recommended
DCR3 SRF4
1. When ordering, please specify termination and packaging codes:
LPO4815-224KLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Inductance2 max
typ Isat5 Irms6
Part number1
(µH)
(Ohms) (MHz) (A)
(A)
LPO4815-102ML_
LPO4815-152ML_
LPO4815-222ML_
LPO4815-332ML_
LPO4815-392ML_
1.0±20%
1.5±20%
2.2±20%
3.3±20%
3.9±20%
0.036
0.085
0.088
0.12
230 1.6
200 1.5
150 1.1
115 0.90 1.3
105 0.86 1.2
1.9
1.7
1.5
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
0.13
LPO4815-472ML_
LPO4815-682ML_
LPO4815-822ML_
LPO4815-103KL_
LPO4815-123KL_
4.7±20%
6.8±20%
8.2±20%
10±10%
12±10%
0.15
0.18
0.22
0.23
0.31
95 0.77 1.1
72 0.65 1.0
65 0.58 0.90
60 0.50 0.85
50 0.45 0.80
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (3500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4191A or equivalent.
5. DC current at which the inductance drops 10% (typ) from its value
without current.
6. Electrical specifications at 25°C.
LPO4815-153KL_
LPO4815-223KL_
LPO4815-333KL_
LPO4815-393KL_
LPO4815-473KL_
15±10%
22±10%
33±10%
39±10%
47±10%
0.36
0.46
0.71
0.83
1.20
45 0.42 0.75
35 0.37 0.70
30 0.28 0.65
25 0.26 0.60
25 0.22 0.55
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
LPO4815-683KL_
LPO4815-104KL_
LPO4815-154KL_
LPO4815-224KL_
68±10%
100±10%
150±10%
220 ±10%
1.40
2.15
3.15
4.30
20 0.20 0.45
15 0.15 0.36
12 0.13 0.30
10 0.11 0.27
Specifications subject to change without notice.
Please check our website for latest information.
Document354-1 Revised10/14/08
© Coilcraft, Inc. 2009