MODEL: LPF
(220 V in code 5 and 6, and 110 V in code 7 and 8
Power Transducer Series L-UNIT
are phase voltage)
POWER FACTOR TRANSDUCER
Functions & Features
[3] OUTPUT SIGNAL POLARITY
P: Negative in lag, positive in lead
• Providing a DC output signal in proportion to power factor
• DC output containing little ripple is ideal for computer
input
M: Negative in lead, positive in lag
• Isolation up to 2000 V AC
[4] OUTPUT
Current
• High-density mounting
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
FW: -10 – +10 mA DC (Load resistance 1000 Ω max.)
GW: -1 – +1 mA DC (Load resistance 10 kΩ max.)
JW: -5 – +5 mA DC (Load resistance 2000 Ω max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
Typical Applications
• Centralized monitoring and control of power management
system in a manufacturing facility or building
• Measuring power factor for a motor
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
1W: -10 – +10 mV DC (Load resistance 10 kΩ min.)
2W: -100 – +100 mV DC (Load resistance 100 kΩ min.)
3W: -1 – +1 V DC (Load resistance 1000 Ω min.)
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
75
(2.95)
75
(2.95)
112
(4.41)
mm (inch)
[5] AUXILIARY POWER SUPPLY
AC Power
B: 100 V AC
C: 110 V AC
MODEL: LPF–[1][2][3][4]–[5][6]
D: 115 V AC
F: 120 V AC
G: 200 V AC
ORDERING INFORMATION
• Code number: LPF–[1][2][3][4]-[5][6]
Specify a code from below for each [1] through [6].
(e.g. LPF-11PA-C/Q)
H: 220 V AC
J: 240 V AC
DC Power
R: 24 V DC
• Special DC output range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
V: 48 V DC
P: 110 V DC
[6] OPTIONS
blank: none
[1] CONFIGURATION
1: 3-phase / 3-wire
/Q: With options (specify the specification)
4: 3-phase / 4-wire
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
[2] INPUT (balanced load)
1: 110 V / 5 A AC
2: 110 V / 1 A AC
/C02: Polyurethane coating
3: 220 V / 1 A AC
/C03: Rubber coating
4: 220 V / 5 A AC
TERMINAL SCREW MATERIAL
/S01: Stainless steel
5: 220 V / 380 V / 1 A AC (3-phase / 4-wire)
6: 220 V / 380 V / 5 A AC (3-phase / 4-wire)
7: 110 V / 190 V / 1 A AC (3-phase / 4-wire)
8: 110 V / 190 V / 5 A AC (3-phase / 4-wire)
http://www.m-system.co.jp/
LPF SPECIFICATIONS
ES-1979 Rev.13 Page 1/3