LP8501
www.ti.com
SNVS548D –SEPTEMBER 2008–REVISED AUGUST 2013
LP8501 Multi-Purpose 9-Output LED Driver
Check for Samples: LP8501
1
FEATURES
DESCRIPTION
The LP8501 is an LED driver with 9 outputs,
designed to produce versatile lighting effects for
mobile devices. The device is equipped with an
internal program memory, which allows operation
without processor control. Internal program memory
is used by three independent program execution
engines to produce user-defined lighting effects for
the outputs.
2
•
Three Independent Program Execution
Engines for User-defined Programs with Large
SRAM Memory for Storing Lighting Programs
•
9 Programmable Source (High Side) Driver
Outputs with 25.5 mA Full-Scale Current, 8-bit
Current Setting Resolution and 12-Bit PWM
Control Resolution
•
Flexible Grouping Possibility for All 9 Outputs
Including GPO into Three Groups with Group
PWM and Fade-In/ Fade-Out Controls
A high-efficiency charge pump enables LED driving
over full Li-Ion battery voltage range. The excellent
efficiency over a wide operating range is achieved by
autonomously selecting the best charge pump gain
based on LED forward voltage requirements. The
LP8501 is able to automatically enter power-save
mode when LED outputs are not active, thus lowering
idle current consumption down to 10 µA (typ.)
•
•
Built-in LED Test
Adaptive Charge Pump with 1x and 1.5x Gain
Provides up to 95% LED Drive Efficiency, with
Soft Start and Overcurrent/Short Circuit
Protection
C
1
C
2
•
Automatic Power Save Mode; IVDD = 10 µA
(typ.)
0.47 PF
0.47 PF
C
OUT
1 PF
C2+ C2-
C1+ C1-
VDD
VOUT
•
•
•
Two Wire, I2C-Compatible, Control Interface
V
= 2.7V TO 5.5V
IN
R
G
Small Application Circuit
C
IN
D7
D1
D2
1 PF
Pin-configured LED Powering for LEDs 1 to 6
and for LEDs 7 to 9
Solution Area <18 mm2
V
OUT
B
VDD1_6
VDD7_9
•
R
G
D8
D3
D4
GPO
INT
APPLICATIONS
LP8501
B
•
•
•
•
Fun Lights and Indicator Lights
SCL
SDA
EN
LED Backlighting and Color Keypad Lighting
Programmable Current Source
MCU
R
G
D9
D5
D6
CLK
Haptic Feedback Driver and GPIO Expander
TRIG
GND
B
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated