Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LP5952
SNVS469F –OCTOBER 2006–REVISED DECEMBER 2015
LP5952 350-mA Dual-Rail Linear Regulator
1 Features
3 Description
The LP5952 is a dual-supply-rail linear regulator
optimized for powering ultralow-voltage circuits from a
single Li-Ion cell or 3-cell NiMH/NiCd battery.
1
•
•
•
•
•
Input Voltage Range: 0.7 V to 4.5 V
2.5 V ≤ VBATT ≤ 5.5 V
0.5V ≤ VOUT ≤ 2 V
In the typical post-regulation application VBATT is
directly connected to the battery (range 2.5 V to
5.5 V), and VIN is supplied by the output voltage of
the DC-DC converter (range 0.7 V to 4.5 V).
Ensured 350-mA Output Current
For ILOAD = 350 mA:
–
V
BATT ≥ VOUT(NOM) + 1.5 V or 2.5 V
(Whichever is Higher)
For ILOAD = 150 mA:
BATT ≥ VOUT(NOM) + 1.3 V or 2.5 V
(Whichever is Higher)
The device offers superior dropout and transient
features combined with very low quiescent currents.
In shutdown mode (Enable (EN) pin pulled low) the
device turns off and reduces battery consumption to
0.1 µA (typical). The LP5952 also features internal
protection against overtemperature, overcurrent, and
undervoltage conditions.
•
•
–
V
Excellent Load Transient Response: ±15 mV
Typical
•
•
•
•
•
•
Excellent Line Transient Response: ±1 mV Typical
50-µA Typical Quiescent Current from VBATT
10-µA Typical Quiescent Current from VIN
0.1-µA Typical Quiescent Current in Shutdown
Noise voltage = 100 µVRMS Typical
Depending upon application, only one or two tiny
surface-mount external components are required;
performance is specified for a –40°C to +125°C
junction temperature range. The device is available in
fixed output voltages from 0.5 V to 2 V. For
availability, please contact your local Texas
Instruments sales office.
Operates from a Single Li-Ion Cell or 3-Cell
NiMH/NiCd Battery
Device Information(1)
•
Thermal-Overload and Short-Circuit Protection
PART NUMBER
PACKAGE
DSBGA (5)
USON (6)
BODY SIZE (NOM)
1.326 mm × 0.96 mm
2.00 mm × 2.00 mm
2 Applications
LP5952
•
•
•
•
•
•
Mobile Phones
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Hand-Held Radios
Personal Digital Assistants
Palm-Top PCs
Portable Instruments
Battery-Powered Devices
Typical Application Circuit
VBATT: 2.7 V to 5.5 V
OUT
BATT
For example, 1.2 V
C1
A3
2.2 mF
Li-Ion
or
3-cell
LP5952
For example,
1.5 V
Load
0 to 350 mA
IN A1
Pre-
NiMh/NiCd
regulator
1 mF
EN
GND
C3
B2
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.