LP38869
www.ti.com
SNVS877B –AUGUST 2012–REVISED APRIL 2013
LP38869 1A FlexCap, Low-Dropout Linear Regulator with 0.75% Accuracy
Check for Samples: LP38869
1
FEATURES
DESCRIPTION
The LP38869 low-dropout linear regulator operates
with an input voltage supply from +2.7V to +5.5V
input, and delivers a specified 1A load current with a
low 200 mV dropout. The high 50 dB PSRR at 100
kHz results from a high gain control loop that also
yields excellent transient response. Coupled with a
2
•
•
•
Operating Input Supply Range: +2.7V to + 5.5V
Maximum Continuous Output Current: 1A
Preset Output Voltage of 2.5V, or Adjustable
Output Voltage From 0.8V to 5.0V
•
•
•
•
•
Pre-Set Output Initial VOUT Tolerance ±0.5%
Adjustable VREF Tolerance of ±0.75%
PSRR of 50dB at 100kHz
high accuracy output voltage, ±0.75
%
over
temperature, the LP38869 is an ideal power supply
for FPGAs, DSPs or MCUs. Output voltage is preset
at +2.5V, or may be adjustable between +0.8V to +5V
with an external resistor divider.
Low 200 mV Dropout at 1A
Typical 2 µA Supply Current in Shutdown
Mode
The LP38869 only needs 1 μF output capacitance for
stability. The FlexCap compensation allows the use of
any type of output capacitor, regardless of ESR.
Other features include: Soft-Start; delayed reset
output; low-power shutdown; short-circuit protection;
and thermal shutdown protection
•
•
•
Adjustable Soft-Start for Output Current
Fold-Back Output Current Limit
Stable With Ceramic, Tantalum, or Aluminum
Capacitors
•
•
•
Stable With 1uF Input/Output Capacitors
Thermal Shutdown
Ground Pin Current: Typically less than 1 mA at 1A
load
16-pin HTSSOP Package
Shutdown Mode: Typically 2 µA quiescent current
when the SHDN pin is pulled low.
APPLICATIONS
Simplified Compensation: Stable with any type of
output capacitor.
•
•
•
•
DSA, FPGA and MCU Power Supply
SMPS Post-Regulator
Applications Requiring Sequencing
Gibabit SERDES Termination Supply
Typical Application Circuit
V
V
OUT
IN
IN
IN
OUT
OUT
OUT
1 mF
1 mF
IN
IN
LP38869
OUT
RST
SET
GND
RESET
ON-
OFF-
SHDN
SS
DAP
C
SS
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012–2013, Texas Instruments Incorporated