5秒后页面跳转
捷配首页

Datasheet > 电源电路 > 线性稳压器IC> LP38852MR-ADJ/NOPB
LP38852MR-ADJ/NOPB PDF预览

LP38852MR-ADJ/NOPB

更新时间： 2024-11-15 11:08:07
品牌 Logo 应用领域
德州仪器 - TI 光电二极管输出元件电源电路线性稳压器IC调节器
页数 文件大小 规格书
29页 1640K
描述
具有使能功能的 1.5A、低输入电压 (0.93V)、可调节超低压降稳压器 | DDA | 8 | -40 to 125

阅读下载

中文翻译

获取价格

LP38852MR-ADJ/NOPB 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Active零件包装代码：SOIC
包装说明：HLSOP, SOP8,.25针数：8
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8542.39.00.01风险等级：0.86
可调性：ADJUSTABLE最大回动电压 1：0.18 V
标称回动电压 1：0.13 V最大输入电压：5.5 V
最小输入电压：0.93 VJESD-30 代码：R-PDSO-G8
JESD-609代码：e3长度：4.89 mm
湿度敏感等级：3功能数量：1
输出次数：1端子数量：8
工作温度TJ-Max：125 °C工作温度TJ-Min：-40 °C
最高工作温度：125 °C最低工作温度：-40 °C
最大输出电流 1：1.5 A最大输出电压 1：1.8 V
最小输出电压 1：0.8 V封装主体材料：PLASTIC/EPOXY
封装代码：HLSOP封装等效代码：SOP8,.25
封装形状：RECTANGULAR封装形式：SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
包装方法：TUBE峰值回流温度（摄氏度）：260
认证状态：Not Qualified调节器类型：ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR
座面最大高度：1.7 mm子类别：Other Regulators
表面贴装：YES技术：CMOS
端子面层：Matte Tin (Sn)端子形式：GULL WING
端子节距：1.27 mm端子位置：DUAL
处于峰值回流温度下的最长时间：NOT SPECIFIED宽度：3.9 mm
Base Number Matches：1

LP38852MR-ADJ/NOPB 数据手册

 浏览型号LP38852MR-ADJ/NOPB的Datasheet PDF文件第2页浏览型号LP38852MR-ADJ/NOPB的Datasheet PDF文件第3页浏览型号LP38852MR-ADJ/NOPB的Datasheet PDF文件第4页浏览型号LP38852MR-ADJ/NOPB的Datasheet PDF文件第5页浏览型号LP38852MR-ADJ/NOPB的Datasheet PDF文件第6页浏览型号LP38852MR-ADJ/NOPB的Datasheet PDF文件第7页 
LP38852  
www.ti.com  
SNVS482E –JANUARY 2007–REVISED APRIL 2013  
1.5A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and  
Soft-Start  
Check for Samples: LP38852  
1
FEATURES  
DESCRIPTION  
The LP38852-ADJ is a high current, fast response  
regulator which can maintain output voltage  
regulation with extremely low input to output voltage  
drop. Fabricated on a CMOS process, the device  
operates from two input voltages: VBIAS provides  
voltage to drive the gate of the N-MOS power  
transistor, while VIN is the input voltage which  
supplies power to the load. The use of an external  
bias rail allows the part to operate from ultra low VIN  
voltages. Unlike bipolar regulators, the CMOS  
architecture consumes extremely low quiescent  
current at any output load current. The use of an N-  
MOS power transistor results in wide bandwidth, yet  
minimum external capacitance is required to maintain  
loop stability.  
2
•
Adjustable VOUT Range of 0.80V to 1.8V  
•
Wide VBIAS Supply Operating Range of 3.0V to  
5.5V  
•
•
Stable with 10µF Ceramic Capacitors  
Dropout Voltage of 130 mV (Typical) at 1.5A  
Load Current  
•
Precision Output Voltage across All Line and  
Load Conditions:  
–
–
–
±1.5% VADJ for TJ = 25°C  
±2.0% VADJ for 0°C ≤ TJ ≤ +125°C  
±3.0% VADJ for -40°C ≤ TJ ≤ +125°C  
•
•
•
Over-Temperature and Over-Current  
Protection  
The fast transient response of this device makes it  
suitable for use in powering DSP, Microcontroller  
Core voltages and Switch Mode Power Supply post  
regulators. The part is available in the TO-220 and  
DDPAK 7-pin packages.  
Available in 8 Lead SO PowerPAD, 7 Lead TO-  
220 and 7 Lead DDPAK Packages  
−40°C to +125°C Operating Junction  
Temperature Range  
Dropout Voltage: 130 mV (typical) at 1.5A load  
current.  
APPLICATIONS  
•
ASIC Power Supplies In:  
Low Ground Pin Current: 10 mA (typical) at 1.5A  
load current.  
–
Desktops, Notebooks, and Graphics Cards,  
Servers  
Soft-Start: Programmable Soft-Start time.  
–
Gaming Set Top Boxes, Printers and  
Copiers  
Precision ADJ Voltage: ±1.5% for TJ = 25°C, and  
±2.0% for 0°C ≤ TJ ≤ +125°C, across all line and load  
conditions  
•
•
•
Server Core and I/O Supplies  
DSP and FPGA Power Supplies  
SMPS Post-Regulator  
Typical Application Circuit  
LP38852-ADJ  
V
V
OUT  
IN  
IN  
OUT  
C
IN  
C
FF  
10 mF Ceramic  
V
BIAS  
BIAS  
R1  
R2  
C
BIAS  
C
OUT  
10 mF  
Ceramic  
1 mF  
ADJ  
V
EN  
EN  
SS  
GND  
C
SS  
GND  
GND  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
All trademarks are the property of their respective owners.  
2
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2007–2013, Texas Instruments Incorporated  
 
1234567...29

中文翻译

下载PDF

LP38852MR-ADJ/NOPB 替代型号

型号 品牌 替代类型 描述 数据表
LP38852MRX-ADJ/NOPB TI

类似代替

 具有使能功能的 1.5A、低输入电压 (0.93V)、可调节超低压降稳压器 | DDA |
LP38852MR-ADJ TI

类似代替

 1.5A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Star
LP38852MRX-ADJ TI

类似代替

 1.5A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Star

与LP38852MR-ADJ/NOPB相关器件

型号 品牌 获取价格 描述 数据表
LP38852MRX-ADJ TI

获取价格

 		1.5A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Star
LP38852MRX-ADJ NSC

获取价格

 		1.5A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Star
LP38852MRX-ADJ/NOPB TI

获取价格

 		具有使能功能的 1.5A、低输入电压 (0.93V)、可调节超低压降稳压器 | DDA |
LP38852S-ADJ NSC

获取价格

 		1.5A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Star
LP38852S-ADJ TI

获取价格

 		1.5A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Star
LP38852S-ADJ/NOPB TI

获取价格

 		具有使能功能的 1.5A、低输入电压 (0.93V)、可调节超低压降稳压器 | KTW |
LP38852SX-ADJ TI

获取价格

 		1.5A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Star
LP38852SX-ADJ NSC

获取价格

 		1.5A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Star
LP38852SX-ADJ/NOPB NSC

获取价格

 		IC VREG 0.8 V-1.8 V ADJUSTABLE POSITIVE LDO REGULATOR, 0.18 V DROPOUT, PSSO7, TO-263, 7 PI
LP38852SX-ADJ/NOPB TI

获取价格

 		具有使能功能的 1.5A、低输入电压 (0.93V)、可调节超低压降稳压器 | KTW |

与LP38852MR-ADJ/NOPB相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证