LP2966
www.ti.com
SNVS028E –APRIL 2000–REVISED APRIL 2013
Dual 150mA Ultra Low-Dropout Regulator
Check for Samples: LP2966
1
FEATURES
KEY SPECIFICATIONS
2
•
•
•
•
•
•
Ultra Low Drop-Out Voltage
•
•
•
•
•
Dropout Voltage: Varies Linearly with Load
Current. Typically 0.9 mV at 1mA Load Current
and 135mV at 150mA Load Current
Low Ground Pin Current
<1µA Quiescent Current in Shutdown Mode
Independent Shutdown of Each LDO Regulator
Output Voltage Accuracy ±1%
Ground Pin Current: Typically 300µA at 1mA
Load Current and 340µA at 100mA Load
Current (with One Shutdown Pin Pulled Low)
Ensured 150mA Output Current at Each
Output
Shutdown Mode: Less than 1µA Quiescent
Current when Both Shutdown Pins are Pulled
Low
•
•
•
•
•
Low Output Noise
Error Flags Indicate Status of Each Output
Available in VSSOP-8 Surface Mount Package
Low Output Capacitor Requirements (1µF)
Error Flag: Open Drain Output, Goes Low
when the Corresponding Output Drops 10%
Below Nominal
Precision Output Voltage: Multiple Output
Voltage Options Available Ranging from 1.8V
to 5.0V with an Ensured Accuracy of ±1% at
Room Temperature
Operates with Low ESR Ceramic Capacitors in
Most Applications
•
•
Over Temperature/Over Current Protection
-40°C to +125°C Junction Temperature Range
DESCRIPTION
APPLICATIONS
The LP2966 dual ultra low-dropout (LDO) regulator
operates from a +2.70V to +7.0V input supply. Each
output delivers 150mA over full temperature range.
The IC operates with extremely low drop-out voltage
and quiescent current, which makes it very suitable
for battery powered and portable applications. Each
LDO in the LP2966 has independent shutdown
capability. The LP2966 provides low noise
performance with low ground pin current in an
extremely small VSSOP-8 package (refer to package
dimensions and CONNECTION DIAGRAM for more
information on VSSOP-8 package). A wide range of
preset voltage options are available for each output.
In addition, many more are available upon request
with minimum orders. In all, 256 voltage combinations
are possible.
•
•
•
•
•
•
•
•
•
Cellular and Wireless Applications
Palmtop/Laptop Computer
GPS Systems
Flat Panel Displays
Post Regulators
USB Applications
Hand Held Equipment and Multimeters
Wireless Data Terminals
Other Battery Powered Applications
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2013, Texas Instruments Incorporated