Dual 2.1W Audio Amplifier Plus Stereo Headphone & 3D Enhancement
LN4888
芯美 子
Dual 2.1W Audio Amplifier
Plus Stereo Headphone & 3D Enhancement
LN4888
■ General Description
The LM4888 is a dual bridge-connected audio power amplifier which, when connected to a 5V
supply, will deliver 2.1W to a 4Ω load (Note 1) or 2.4W to a 3Ω load (Note 2) with less than 1.0%
THD+N.
A user selectable “3D Enhancement” mode provides enhanced stereo imaging.
The LM4888SQ also has two separate HP (headphone) enable inputs, each having different
logic level thresholds. Either HP enable input activates the single ended headphone mode and
disables the BTL output mode. The HP Sense input is for use with a normal stereo headphone
jack. The remaining input, HP Logic, accepts standard logic level thresholds.
Boomer audio power amplifiers were designed specifically to provide high quality output
power from a surface mount package while requiring few external components. To simplify
audio system design, the LM4888SQ combines dual bridge speaker amplifiers and stereo
headphone amplifiers on one chip.
The LM4888SQ features a low-power consumption shutdown mode and thermal shutdown
protection. It also utilizes circuitry to reduce “clicks and pops” during device turn-on.
■ Key Specifications
PO at 1% THD+N & VDD=5V
RL=3Ω
2.4W(typ.)
2.1W(typ.)
1.3W(typ.)
0.01%(typ.)
0.04uA(typ.)
2.7V~5V
RL=4Ω
RL=8Ω
Single-ended mode THD+N at 75mW into 32 Ω(5V,1kHz)
Shutdown current
Supply voltage range
PSRR at fIN=217HZ
85dB(typ.)
■ Features
z
National 3D Enhancement
z
z
z
z
z
z
Selectable headphone enable modes
Stereo headphone amplifier mode
Improved “click and pop” suppression circuitry
Thermal shutdown protection circuitry
PCB area-saving SQ package
Micro power shutdown mode
系 :15999644579 83151715