Platinum Resistance Temperature Detector
LN 222
L series PRTDs are designed for large volume applications where long term stability, interchangeability and accuracy over
a large temperature range are vital. Typical applications are Automotive, White goods, HVAC, Energy management,
Medical and Industrial equipment.
Nominal
Resistance R0
Tolerance
DIN EN 60751
1996-07
Tolerance
DIN EN 60751
2009-05
Order Number
Plastic Bag
Class A
Class B
F 0,15
F 0,3
32 207 771
32 207 770
100 Ohm at 0°C
1000 Ohm at 0°C
Class A
Class B
F 0,15
F 0,3
32 207 773
32 207 772
The measuring point for the nominal resistance is defined at 8mm from the end of the sensor body.
Specification
DIN EN 60751 (according to IEC 751)
-50°C to +400°C (continuous operation)
Temperature range
Tolerance Class B:
Tolerance Class A:
-50°C to +400°C
-50°C to +300°C
Temperature coefficient
Leads
TCR = 3850 ppm/K
Ni- silvercoated
Recommend connection technology:
Soft soldering and Crimping
Lead lengths (L)
10mm ±1mm
Vibration resistance
at least 40g acceleration at 10 to 2000 Hz,
depends on installation
Shock resistance
at least 100g acceleration with 8ms half sine
wave, depends on installation
Environmental conditions
Insulation resistance
Self heating
unhoused for dry environments only
> 100 MΩ at 20°C; > 2 M Ω at 400°C
0.4 K/mW at 0°C
Response time
water current (v= 0.4m/s):
air stream (v= 2m/s):
t0.5 = 0.05s
t0.9 = 0.15s
t0.5 = 3.0s
t0.9 = 10.0s
Measuring current
Note
100Ω: 0.3 to 1.0mA
1000Ω: 0.1 to 0.3mA
(self heating has to be considered)
Other tolerances, values of resistance and wire
lengths are available on request.
We reserve the right to make alterations and technical data printed. All technical data serves as a guideline and does not guarantee
particular properties to any products.
Heraeus Sensor Technology USA
1901 Route 130
North Brunswick, NJ 08902
Phone 732-940-4400
Email info.hst-us@heraeus.com
http://heraeus-sensor-technology-us.com
Fax 732-940-4445
Name of document: 30.910.062 Index A
Status: 08/2012