Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LMZ22008
SNVS712H –FEBRUARY 2010–REVISED AUGUST 2015
®
LMZ22008 8-A SIMPLE SWITCHER Power Module With 20-V Maximum Input Voltage and
Current Sharing
1 Features
2 Applications
1
•
•
•
Integrated Shielded Inductor
Simple PCB Layout
•
•
•
Point-of-load Conversions from 12-V Input Rail
Time-Critical Projects
Frequency Synchronization Input (350 kHz to 600
kHz)
Space Constrained and High Thermal
Requirement Applications
•
•
Current Sharing Capability
•
Negative Output Voltage Applications
See AN-2027 SNVA425
Flexible Start-up Sequencing Using External
Soft-Start, Tracking and Precision Enable
3 Description
•
Protection Against Inrush Currents and Faults
such as Input UVLO and Output Short Circuit
The LMZ22008 SIMPLE SWITCHER® power module
is an easy-to-use step-down DC-DC solution capable
of driving up to 8-A load. The LMZ22008 is available
in an innovative package that enhances thermal
performance and allows for hand or machine
soldering.
•
•
Junction Temperature Range –40°C to 125°C
Single Exposed Pad and Standard Pinout for Easy
Mounting and Manufacturing
Fully Enabled for WEBENCH® Power Designer
•
•
The LMZ22008 can accept an input voltage rail
between 6 V and 20 V and deliver an adjustable and
highly accurate output voltage as low as 0.8 V. The
LMZ22008 only requires two external resistors and
external capacitors to complete the power solution.
Pin Compatible With LMZ22010/06,
LMZ12010/08/06, LMZ23610/08/06, and
LMZ13610/08/06
•
•
Electrical Specifications
–
–
–
–
–
40-W Maximum Total Output Power
Up to 8-A Output Current
The LMZ22008 is a reliable and robust design with
the following protection features: thermal shutdown,
programmable input undervoltage lockout, output
overvoltage protection, short circuit protection, output
current limit, and allows start-up into a prebiased
output.
Input Voltage Range 6 V to 20 V
Output Voltage Range 0.8 V to 6 V
Efficiency up to 92%
Performance Benefits
The sync input allows synchronization over the 314-
to 600-kHz switching frequency range and up to 6
modules can be connected in parallel for higher load
currents.
–
High Efficiency Reduces System Heat
Generation
–
Low Radiated Emissions (EMI) Tested to
EN55022
Device Information(1)(2)
–
–
–
–
Only 7 External Components
Low Output Voltage Ripple
No External Heat Sink Required
PART NUMBER
PACKAGE
BODY SIZE (NOM)
LMZ22008
NDY (11)
15.00 mm × 15.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simple Current Sharing for Higher Current
Applications
(2) Peak reflow temperature equals 245°C. See SNAA214 for
more details.
NOTE: EN 55022:2006, +A1:2007, FCC Part 15 Subpart B,
tested on Evaluation Board with EMI configuration.
Simplified Application Schematic
Efficiency 3.3-V Output at 25°C
100
LMZ22008
90
V
V
OUT
IN
80
70
Share
C
Clock
4.7 nF (OPT)
FF
60
Enable
6Vin
R
FBT
8Vin
10Vin
50
See Table
12Vin
16Vin
20Vin
C
SS
C
R
FBB
C
40
IN
OUT
2 x 330 PF
0.47 PF
(OPT)
3 x 10 PF
See Table
0
2
4
6
8
OUTPUT CURRENT (A)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.