5秒后页面跳转
LMS1487EIMX PDF预览

LMS1487EIMX

更新时间: 2024-11-06 21:53:55
品牌 Logo 应用领域
美国国家半导体 - NSC 总线收发器
页数 文件大小 规格书
13页 247K
描述
Low Power RS-485 / RS-422 Differential Bus Transceiver

LMS1487EIMX 数据手册

 浏览型号LMS1487EIMX的Datasheet PDF文件第2页浏览型号LMS1487EIMX的Datasheet PDF文件第3页浏览型号LMS1487EIMX的Datasheet PDF文件第4页浏览型号LMS1487EIMX的Datasheet PDF文件第5页浏览型号LMS1487EIMX的Datasheet PDF文件第6页浏览型号LMS1487EIMX的Datasheet PDF文件第7页 
November 2003  
LMS1487E  
Low Power RS-485 / RS-422 Differential Bus Transceiver  
General Description  
Features  
n Meet ANSI standard RS-485 and RS-422  
n Data rate 2.5 Mbps  
The LMS1487E is a low power differential bus/line trans-  
ceiver designed for high speed bidirectional data communi-  
cation on multipoint bus transmission lines. It is designed for  
balanced transmission lines. It meets ANSI Standards TIA/  
EIA RS422-B, TIA/EIA RS485-A and ITU recommendation  
and V.11 and X.27. The driver outputs and receiver inputs  
have 15kV ESD protection. The LMS1487E combines a  
n Single supply voltage operation, 5V  
n Wide input and output voltage range  
n Thermal shutdown protection  
n Short circuit protection  
n Low quiescent current 660µA (max)  
n Allows up to 128 transceivers on the bus  
n Open circuit fail-safe for receiver  
n Extended operating temperature range −40˚C to 85˚C  
n Drop-in replacement to MAX1487E  
n Available in 8-pin SOIC and 8-pin DIP packages  
TRI-STATE differential line driver and differential input re-  
ceiver, both of which operate from a single 5.0V power  
supply. The driver and receiver have an active high and  
active low, respectively, that can be externally connected to  
function as a direction control. The driver outputs and re-  
ceiver inputs are internally connected to form a differential  
input/output (I/O) bus port that is designed to offer minimum  
loading to bus whenever the driver is disabled or when VCC  
= 0V. These ports feature wide positive and negative com-  
mon mode voltage ranges, making the device suitable for  
multipoint applications in noisy environments. The  
LMS1487E is available in 8-Pin SOIC and 8-pin DIP pack-  
ages. It is a drop-in replacement to Maxim’s MAX1487E.  
Applications  
n Low power RS-485 systems  
n Network hubs, bridges, and routers  
n Point of sales equipment (ATM, barcode scanners,…)  
n Local area networks (LAN)  
n Integrated service digital network (ISDN)  
n Industrial programmable logic controllers  
n High speed parallel and serial applications  
n Multipoint applications with noisy environment  
Typical Application  
20085601  
A typical multipoint application is shown in the above figure. Terminating resistor, RT are typically required but only located at the two ends of the cable.  
Pull-up and pull-down resistors maybe required at the end of the bus to provide fail-safe biasing. The biasing resistors provide a bias to the cable when all  
drivers are in TRI-STATE, See National Application Note, AN-847 for further information.  
© 2003 National Semiconductor Corporation  
DS200856  
www.national.com  

与LMS1487EIMX相关器件

型号 品牌 获取价格 描述 数据表
LMS1487EIMX/NOPB TI

获取价格

LINE TRANSCEIVER, PDSO8, SOIC-8
LMS1487EINA NSC

获取价格

Low Power RS-485 / RS-422 Differential Bus Transceiver
LMS1487IM NSC

获取价格

5V Low Power RS-485 / RS-422 Differential Bus Transceiver
LMS1487IM/NOPB ROCHESTER

获取价格

LINE TRANSCEIVER, PDSO8, SOIC-8
LMS1487IMX NSC

获取价格

5V Low Power RS-485 / RS-422 Differential Bus Transceiver
LMS1487INA NSC

获取价格

5V Low Power RS-485 / RS-422 Differential Bus Transceiver
LMS1585 NSC

获取价格

5A and 3A Low Dropout Fast Response Regulators
LMS1585A NSC

获取价格

5A and 3A Low Dropout Fast Response Regulators
LMS1585A TI

获取价格

5A、13V 线性稳压器
LMS1585A_15 TI

获取价格

LMS1585A 5A/LMS1587 5A and 3A Low Dropout Fast Response Regulators