5秒后页面跳转
捷配首页

Datasheet > LMP8602MAX
LMP8602MAX PDF预览

LMP8602MAX

更新时间： 2024-11-23 05:42:27
品牌 Logo 应用领域
美国国家半导体 - NSC 放大器
页数 文件大小 规格书
24页 579K
描述
60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier

阅读下载

中文翻译

获取价格

LMP8602MAX 技术参数

是否Rohs认证： 不符合生命周期：Transferred
零件包装代码：SOIC包装说明：SOIC-8
针数：8Reach Compliance Code：not_compliant
ECCN代码：EAR99HTS代码：8542.33.00.01
风险等级：5.62放大器类型：INSTRUMENTATION AMPLIFIER
最大平均偏置电流 (IIB)：0.02 µA标称带宽 (3dB)：0.06 MHz
最小共模抑制比：90 dB最大输入失调电压：1000 µV
JESD-30 代码：R-PDSO-G8JESD-609代码：e0
长度：4.9 mm湿度敏感等级：1
功能数量：1端子数量：8
最高工作温度：125 °C最低工作温度：-40 °C
封装主体材料：PLASTIC/EPOXY封装代码：SOP
封装等效代码：SOP8,.25封装形状：RECTANGULAR
封装形式：SMALL OUTLINE电源：3.3/5 V
认证状态：Not Qualified座面最大高度：1.75 mm
标称压摆率：0.83 V/us子类别：Other Amplifiers
最大压摆率：1.5 mA供电电压上限：6 V
标称供电电压 (Vsup)：3.3 V表面贴装：YES
温度等级：AUTOMOTIVE端子面层：Tin/Lead (Sn85Pb15)
端子形式：GULL WING端子节距：1.27 mm
端子位置：DUAL最大电压增益：50.25
最小电压增益：49.75标称电压增益：50
宽度：3.9 mmBase Number Matches：1

LMP8602MAX 数据手册

 浏览型号LMP8602MAX的Datasheet PDF文件第2页浏览型号LMP8602MAX的Datasheet PDF文件第3页浏览型号LMP8602MAX的Datasheet PDF文件第4页浏览型号LMP8602MAX的Datasheet PDF文件第5页浏览型号LMP8602MAX的Datasheet PDF文件第6页浏览型号LMP8602MAX的Datasheet PDF文件第7页 
March 18, 2010  
LMP8602/LMP8602Q/  
LMP8603/LMP8603Q  
60V Common Mode, Fixed Gain, Bidirectional Precision  
Current Sensing Amplifier  
General Description  
Features  
The LMP8602 and LMP8603 are fixed gain precision ampli-  
fiers. The parts will amplify and filter small differential signals  
in the presence of high common mode voltages. The input  
common mode voltage range is –22V to +60V when operating  
from a single 5V supply. With a 3.3V supply, the input com-  
mon mode voltage range is from –4V to +27V. The LMP8602  
and LMP8603 are members of the Linear Monolithic Precision  
(LMP®) family and are ideal parts for unidirectional and bidi-  
rectional current sensing applications. All parameter values  
of the parts that are shown in the tables are 100% tested and  
all bold values are also 100% tested over temperature.  
Unless otherwise noted, typical values at TA = 25°C,  
VS = 5.0V, Gain = 50x (LMP8602), Gain = 100x (LMP8603)  
TCVos  
CMRR  
Input offset voltage  
CMVR at VS = 3.3V  
CMVR at VS = 5.0V  
10μV/°C max  
90 dB min  
1 mV max  
−4V to 27V  
−22V to 60V  
■
■
■
■
■
■
■
■
■
Operating ambient temperature range −40°C to 125°C  
Single supply bidirectional operation  
All Min / Max limits 100% tested  
The parts have a precise gain of 50x for the LMP8602 and  
100x for the LMP8603, which are adequate in most targeted  
applications to drive an ADC to its full scale value. The fixed  
gain is achieved in two separate stages, a preamplifier with a  
gain of 10x and an output stage buffer amplifier with a gain of  
5x for the LMP8602 and 10x for the LMP8603. The connection  
between the two stages of the signal path is brought out on  
two pins to enable the possibility to create an additional filter  
network around the output buffer amplifier. These pins can  
also be used for alternative configurations with different gain  
as described in the applications section.  
LMP8602Q and LMP8603Q available in Automotive AEC-  
Q100 Grade 1 qualified version  
Applications  
High side and low side driver configuration current sensing  
■
■
■
■
■
■
■
Bidirectional current measurement  
Current loop to voltage conversion  
Automotive fuel injection control  
Transmission control  
Power steering  
The mid-rail offset adjustment pin enables the user to use  
these devices for bidirectional single supply voltage current  
sensing. The output signal is bidirectional and mid-rail refer-  
enced when this pin is connected to the positive supply rail.  
With the offset pin connected to ground, the output signal is  
unidirectional and ground-referenced.  
Battery management systems  
The LMP8602 and LMP8603 are available in a 8–Pin SOIC  
package and in a 8–Pin MSOP package.  
The LMP8602Q and LMP8603Q incorporate enhanced man-  
ufacturing and support processes for the automotive market,  
including defect detection methodologies. Reliability qualifi-  
cation is compliant with the requirements and temperature  
grades defined in the AEC Q100 standard.  
Typical Applications  
30083401  
LMP™ is a trademark of National Semiconductor Corporation.  
© 2010 National Semiconductor Corporation  
300834  
www.national.com  
1234567...24

中文翻译

下载PDF

与LMP8602MAX相关器件

型号 品牌 获取价格 描述 数据表
LMP8602MAX/NOPB TI

获取价格

 		具有直列式滤波器功能的 -22V 至 60V、双向电流感应放大器 | D | 8 | -4
LMP8602MM NSC

获取价格

 		60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier
LMP8602MM TI

获取价格

 		60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier
LMP8602MM/NOPB TI

获取价格

 		具有直列式滤波器功能的 -22V 至 60V、双向电流感应放大器 | DGK | 8 |
LMP8602MME TI

获取价格

 		IC,SENSE AMPLIFIER,SINGLE,TSSOP,8PIN,PLASTIC
LMP8602MME/NOPB TI

获取价格

 		具有直列式滤波器功能的 -22V 至 60V、双向电流感应放大器 | DGK | 8 |
LMP8602MMX NSC

获取价格

 		60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier
LMP8602MMX TI

获取价格

 		60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier
LMP8602MMX/NOPB TI

获取价格

 		具有直列式滤波器功能的 -22V 至 60V、双向电流感应放大器 | DGK | 8 |
LMP8602Q NSC

获取价格

 		60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier

与LMP8602MAX相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证