5秒后页面跳转
LMP8603 PDF预览

LMP8603

更新时间: 2024-11-18 05:42:27
品牌 Logo 应用领域
美国国家半导体 - NSC 放大器
页数 文件大小 规格书
24页 572K
描述
60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier

LMP8603 数据手册

 浏览型号LMP8603的Datasheet PDF文件第2页浏览型号LMP8603的Datasheet PDF文件第3页浏览型号LMP8603的Datasheet PDF文件第4页浏览型号LMP8603的Datasheet PDF文件第5页浏览型号LMP8603的Datasheet PDF文件第6页浏览型号LMP8603的Datasheet PDF文件第7页 
July 17, 2009  
LMP8602/LMP8603  
60V Common Mode, Fixed Gain, Bidirectional Precision  
Current Sensing Amplifier  
General Description  
Features  
The LMP8602 and LMP8603 are fixed gain precision ampli-  
fiers. The parts will amplify and filter small differential signals  
in the presence of high common mode voltages. The input  
common mode voltage range is –22V to +60V when operating  
from a single 5V supply. With a 3.3V supply, the input com-  
mon mode voltage range is from –4V to +27V. The LMP8602  
and LMP8603 are members of the Linear Monolithic Precision  
(LMP®) family and are ideal parts for unidirectional and bidi-  
rectional current sensing applications. All parameter values  
of the parts that are shown in the tables are 100% tested and  
all bold values are also 100% tested over temperature.  
Unless otherwise noted, typical values at TA = 25°C,  
VS = 5.0V, Gain = 50x (LMP8602), Gain = 100x (LMP8603)  
TCVos  
10μV/°C max  
90 dB min  
1 mV max  
−4V to 27V  
−22V to 60V  
CMRR  
Input offset voltage  
CMVR at VS = 3.3V  
CMVR at VS = 5.0V  
Operating ambient temperature range −40°C to 125°C  
Single supply bidirectional operation  
All Min / Max limits 100% tested  
The parts have a precise gain of 50x for the LMP8602 and  
100x for the LMP8603, which are adequate in most targeted  
applications to drive an ADC to its full scale value. The fixed  
gain is achieved in two separate stages, a preamplifier with a  
gain of 10x and an output stage buffer amplifier with a gain of  
5x for the LMP8602 and 10x for the LMP8603. The connection  
between the two stages of the signal path is brought out on  
two pins to enable the possibility to create an additional filter  
network around the output buffer amplifier. These pins can  
also be used for alternative configurations with different gain  
as described in the applications section.  
Applications  
High side and low side driver configuration current sensing  
Bidirectional current measurement  
Current loop to voltage conversion  
Automotive fuel injection control  
Transmission control  
Power steering  
Battery management systems  
The mid-rail offset adjustment pin enables the user to use  
these devices for bidirectional single supply voltage current  
sensing. The output signal is bidirectional and mid-rail refer-  
enced when this pin is connected to the positive supply rail.  
With the offset pin connected to ground, the output signal is  
unidirectional and ground-referenced.  
The LMP8602 and LMP8603 are available in a 8–Pin SOIC  
package and in a 8–Pin MSOP package.  
Typical Applications  
30083401  
LMP™ is a trademark of National Semiconductor Corporation.  
© 2009 National Semiconductor Corporation  
300834  
www.national.com  

与LMP8603相关器件

型号 品牌 获取价格 描述 数据表
LMP8603MA NSC

获取价格

60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier
LMP8603MA TI

获取价格

60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier
LMP8603MA/NOPB TI

获取价格

具有直列式滤波器功能的 -22V 至 60V、双向电流感应放大器 | D | 8 | -4
LMP8603MAX NSC

获取价格

60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier
LMP8603MAX TI

获取价格

60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier
LMP8603MAX/NOPB TI

获取价格

具有直列式滤波器功能的 -22V 至 60V、双向电流感应放大器 | D | 8 | -4
LMP8603MM NSC

获取价格

60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier
LMP8603MM TI

获取价格

60V Common Mode, Fixed Gain, Bidirectional Precision Current Sensing Amplifier
LMP8603MM/NOPB TI

获取价格

具有直列式滤波器功能的 -22V 至 60V、双向电流感应放大器 | DGK | 8 |
LMP8603MME TI

获取价格

IC,SENSE AMPLIFIER,SINGLE,TSSOP,8PIN,PLASTIC