LMP7300
www.ti.com
SNOSAT7F –AUGUST 2007–REVISED MARCH 2013
Micropower Precision Comparator and Precision Reference with Adjustable Hysteresis
Check for Samples: LMP7300
1
FEATURES
DESCRIPTION
The LMP7300 is a combination comparator and
reference with ideal specifications for precision
threshold detecting. The precision 2.048V reference
comes with a 0.25% maximum error. The comparator
features micropower (35 µW), low offset voltage
(0.75 mV max), and independent adjustable positive
and negative hysteresis.
2
•
(For VS = 5V, typical unless otherwise noted)
Supply Current 13 μA
•
•
•
•
•
•
•
•
•
•
•
•
Propagation Delay 4 μs
Input Offset Voltage 0.3 mV
CMRR 100 dB
PSRR 100 dB
Hysteresis control for the comparator is accomplished
through two external pins. The HYSTP pin sets the
positive hysteresis and the HYSTN pin sets the
negative hysteresis. The comparator design isolates
the VIN source impedance and the programmable
hysteresis components. This isolation prevents any
undesirable interaction allowing the IC to maintain a
precise threshold voltage during level detection.
Positive and Negative Hysteresis Control
Adjustable Hysteresis 1 mV/mV
Reference Voltage 2.048V
Reference Voltage Accuracy 0.25%
Reference Voltage Source Current 1 mA
Wide Supply Voltage Range 2.7V to 12V
Operating Temperature Range Ambient −40°C
to 125°C
The combination of low offset voltage, external
hysteresis control, and precision voltage reference
provides an easy to use micropower precision
threshold detector.
APPLICATIONS
The LMP7300 open collector output makes it ideal for
mixed voltage system designs. The output voltage
upper rail is unconstrained by VCC and can be pulled
above VCC to a maximum of 12V. The LMP7300 is a
member of the LMP precision amplifier family.
•
•
•
•
Precision Threshold Detection
Battery Monitoring
Battery Management Systems
Zero Crossing Detectors
Typical Application
Micropower Precision Battery Low Voltage Detector for 3
Cell Discharge Voltage
30
V
= (TRIP @ .9V x 3 CELL)
BATT
+
V
C
= 12V
= 10 pF
25
20
15
10
5
L
R
5
0.1 mF
ADJUST
R
1
FOR LED
BRIGHTNESS
318.4 kW
+
1%
V
INP
INN
HYSTP
LED
+
-
R
2
1 MW
1%
OUT
HYSTN
V
REF
-40°C
25°C
GND
85°C
R
3
9.86 kW
1%
125°C
20
0
0
40
60
80
100
R
1 MW
4
OVERDRIVE VOLTAGE (mV)
1%
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated