Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LMC567
SNOSBY1C –JUNE 1999–REVISED DECEMBER 2015
LMC567 Low-Power Tone Decoder
1 Features
3 Description
The LMC567 device is a low-power, general-purpose
LMCMOS tone decoder which is functionally similar
to the industry standard LM567. The device consists
of a twice frequency voltage-controlled oscillator
(VCO) and quadrature dividers which establish the
reference signals for phase and amplitude detectors.
1
•
•
•
•
•
•
•
•
•
•
Functionally Similar to LM567
2-V to 9-V Supply Voltage Range
Low Supply Current Drain
No Increase in Current With Output Activated
Operates to 500-kHz Input Frequency
High Oscillator Stability
The phase detector and VCO form a phase-locked
loop (PLL) which locks to an input signal frequency
which is within the control range of the VCO. When
the PLL is locked and the input signal amplitude
exceeds an internally pre-set threshold, a switch to
ground is activated on the output pin. External
components set up the oscillator to run at twice the
input frequency and determine the phase and
amplitude filter time constants.
Ground-Referenced Input
Hysteresis Added to Amplitude Comparator
Out-of-Band Signals and Noise Rejected
20-mA Output Current Capability
2 Applications
•
•
•
•
•
•
•
Touch-Tone Decoding
(1)
Device Information
Precision Oscillators
PART NUMBER
PACKAGE
BODY SIZE (NOM)
Frequency Monitoring and Control
Wide-Band FSK Demodulation
Ultrasonic Controls
LMC567
SOIC (8)
4.90 mm × 3.91 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Carrier Current Remote Controls
Communications Paging Decoders
Simplified Diagram
1
2
3
4
8
7
6
ꢂ
!mpliꢁude
5eꢁecꢁor
÷2
÷2
tꢀase
5eꢁecꢁor
ë/h
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.