LM5009
www.ti.com
SNVS402G –FEBRUARY 2006–REVISED FEBRUARY 2013
150-mA 100-V Step-Down Switching Regulator
Check for Samples: LM5009
1
FEATURES
DESCRIPTION
The LM5009 Step Down Switching Regulator features
all of the functions needed to implement a low cost,
efficient, Buck bias regulator. This device is capable
of driving a 150 mA load current from a 9.5V to 95V
input source. The switching frequency can exceed
600 kHz, depending on the input and output voltages.
The output voltage may be set from 2.5V to 85V. This
high voltage regulator contains an N-Channel buck
switch and internal startup regulator. The device is
easy to implement and is provided in the 8-pin
VSSOP and the thermally enhanced 8-pin WSON
packages. The LM5009 is a well suited alternative to
a high voltage monolithic or discrete linear solution
where the power loss becomes unacceptable. The
regulator’s operation is based on a control scheme
using an ON time inversely proportional to VIN. This
feature allows the operating frequency to remain
relatively constant over load and input voltage
variations. The control scheme requires no loop
compensation, resulting in an ultra-fast transient
response. An intelligent current limit is implemented
with forced OFF time, which is inversely proportional
to Vout. This scheme ensures short circuit protection
while providing minimum foldback. Other features
include: Thermal Shutdown, Vcc under-voltage
lockout, Gate drive under-voltage lockout, and
Maximum Duty Cycle limiter.
2
•
•
•
•
•
Integrated N-Channel MOSFET
150-mA output current capability
Ultra-Fast Transient Response
No loop compensation required
Vin feed forward provides constant operating
frequency
•
•
•
Switching frequency can exceed 600 kHz
Highly efficient operation
2% accurate 2.5V feedback from -40°C to
125°C
•
•
•
•
•
Internal startup regulator
Intelligent current limit protection
External shutdown control
Thermal shutdown
8-Pin VSSOP and thermally enhanced 8-Pin
WSON packages
APPLICATIONS
•
Heat sink eliminator for classic linear regulator
applications
•
•
•
12V, 24V, 36V, and 48V rectified AC systems
42V Automotive
Non-isolated AC mains charge coupled
supplies
•
LED Current Source
Typical Application Circuit
9. 5- 95V
Input
VIN
VCC
C3
C1
LM5009
BST
R
ON
C4
RON/SD
L1
SW
V
OUT
SHUTDOWN
C2
D1
RCL
RTN
R1
R2
R
CL
FB
Figure 1. Basic Step-Down Regulator
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated