Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM5009
SNVS402H –FEBRUARY 2006–REVISED OCTOBER 2015
LM5009 Wide Input, 100-V,150-mA, Step-Down Switching Regulator
1 Features
3 Description
The LM5009 step-down switching regulator features
1
•
•
•
•
•
Integrated N-Channel MOSFET
150-mA Output Current Capability
Ultra-Fast Transient Response
No Loop Compensation Required
all of the functions needed to implement a low-cost,
efficient, buck bias regulator. This device is capable
of driving a 150-mA load current from a 9.5-V to 95-V
input source. The switching frequency can exceed
600 kHz, depending on the input and output voltages.
The output voltage can be set from 2.5 V to 85 V.
This high-voltage regulator contains an N-channel
buck switch and an internal startup regulator. The
device is easy to implement and is provided in 8-pin
VSSOP and thermally-enhanced, 8-pin WSON
packages. The LM5009 is a well-suited alternative to
a high-voltage monolithic or discrete linear solution
where the power loss becomes unacceptable. The
regulator operation is based on a control scheme
using an on-time inversely proportional to VIN. This
feature allows the operating frequency to remain
relatively constant over load and input voltage
variations. The control scheme requires no loop
compensation, resulting in an ultrafast transient
response. An intelligent current limit is implemented
with forced off-time that is inversely proportional to
VOUT. This scheme ensures short-circuit protection
and provides minimum foldback. Other features
include thermal shutdown, VCC undervoltage lockout,
gate drive undervoltage lockout, and maximum duty
cycle limiter.
VIN Feed-Forward Provides Constant Operating
Frequency
•
•
•
Switching Frequency Can Exceed 600 kHz
Highly Efficient Operation
2% Accurate 2.5-V Feedback From
–40°C to +125°C
•
•
•
•
•
Internal Startup Regulator
Intelligent Current Limit Protection
External Shutdown Control
Thermal Shutdown
8-Pin VSSOP and Thermally-Enhanced 8-Pin
WSON Packages
2 Applications
•
Heat Sink Eliminator for Classic Linear Regulator
Applications
•
•
•
•
12-V, 24-V, 36-V, and 48-V Rectified AC Systems
42-V Automotive
Device Information(1)
Non-Isolated AC Mains Charge-Coupled Supplies
LED Current Source
PART NUMBER
LM5009
PACKAGE
VSSOP (8)
WSON (8)
BODY SIZE (NOM)
3.00 mm × 3.00 mm
4.00 mm × 4.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application Circuit
9. 5- 95V
Input
VIN
VCC
C3
C1
LM5009
BST
R
ON
C4
RON/SD
L1
SW
V
OUT
SHUTDOWN
C2
D1
RCL
RTN
R1
R2
R
CL
FB
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.