5秒后页面跳转
LM48510 PDF预览

LM48510

更新时间: 2024-11-09 04:20:07
品牌 Logo 应用领域
美国国家半导体 - NSC 放大器功率放大器
页数 文件大小 规格书
20页 401K
描述
Boosted Class D Audio Power Amplifier

LM48510 数据手册

 浏览型号LM48510的Datasheet PDF文件第2页浏览型号LM48510的Datasheet PDF文件第3页浏览型号LM48510的Datasheet PDF文件第4页浏览型号LM48510的Datasheet PDF文件第5页浏览型号LM48510的Datasheet PDF文件第6页浏览型号LM48510的Datasheet PDF文件第7页 
March 2007  
LM48510  
Boosted Class D Audio Power Amplifier  
General Description  
Key Specifications  
The LM48510 integrates a boost converter with a high effi-  
ciency mono, Class D audio power amplifier to provide 1.2W  
continuous power into an 8speaker when operating on a  
3.3V power supply with boost voltage (PV1) of 5.0V. When  
operating on a 3.3V power supply, the LM48510 is capable of  
driving a 4speaker load at a continuous average output of  
1.7W with less than 1% THD+N. The Class D amplifier is a  
low noise, filterless PWM architecture that eliminates the out-  
put filter, reducing external component count, board area  
consumption, system cost, and simplifying design.  
■ꢀQuiescent Power Supply Current  
■ꢀOutput Power  
(RL = 8Ω, THD+N 1%,  
VDD = 3.3V, PV1 = 5.0V)  
6mA (typ)  
1.2W (typ)  
0.01μA (typ)  
■ꢀShutdown Current  
Features  
Click and Pop Suppression  
The LM48510's switching regulator is a current-mode boost  
converter operating at a fixed frequency of 0.6MHz.  
Low 0.01μA Shutdown Current  
76% Efficiency  
The LM48510 is designed for use in mobile phones and other  
portable communication devices. The high (76%) efficiency  
extends battery life when compared to Boosted Class AB am-  
plifiers. The LM48510 features a low-power consumption  
shutdown mode. Shutdown may be enabled by driving the  
Shutdown pin to a logic low (GND).  
Filterless Class D  
2.7V - 5.0V operation (VDD  
)
Externally configurable gain on Class D  
Very fast turn on time: 17μs  
Independent Boost and Amplifier shutdown pins  
The gain of the Class D is externally configurable which allows  
independent gain control from multiple sources by summing  
the signals. Output short circuit and Thermal shutdown pro-  
tection prevent the device from damage during fault condi-  
tions. Superior click and pop suppression eliminates audible  
transients during power-up and shutdown.  
Applications  
Mobile Phones  
PDAs  
Portable media  
Cameras  
Handheld games  
Typical Application  
20123266  
FIGURE 1. Typical LM48510 Audio Amplifier Application Circuit  
Boomer® is a registered trademark of National Semiconductor Corporation.  
© 2007 National Semiconductor Corporation  
201232  
www.national.com  

与LM48510相关器件

型号 品牌 获取价格 描述 数据表
LM48510_0710 NSC

获取价格

Boosted Class D Audio Power Amplifier
LM48510SD NSC

获取价格

Boosted Class D Audio Power Amplifier
LM48510SDX NSC

获取价格

IC 1.7 W, 1 CHANNEL, AUDIO AMPLIFIER, DSO16, LLP-16, Audio/Video Amplifier
LM48511 NSC

获取价格

3W, Ultra-Low EMI, Filterless, Mono, Class D Audio Power Amplifier with Spread Spectrum
LM48511 TI

获取价格

具有集成升压转换器的 3W 单声道、模拟输入 D 类音频放大器
LM48511_08 NSC

获取价格

3W, Ultra-Low EMI, Filterless, Mono, Class D Audio Power Amplifier with Spread Spectrum
LM48511SQ NSC

获取价格

3W, Ultra-Low EMI, Filterless, Mono, Class D Audio Power Amplifier with Spread Spectrum
LM48511SQ/NOPB TI

获取价格

具有集成升压转换器的 3W 单声道、模拟输入 D 类音频放大器 | NHZ | 24 |
LM48511SQX/NOPB TI

获取价格

具有集成升压转换器的 3W 单声道、模拟输入 D 类音频放大器 | NHZ | 24 |
LM48512 TI

获取价格

PowerWise® Boosted, Ultra Low-EMI, Mono, E2S