5x7mm Surface Mount
LVDS Clock Oscillator
CW
Features:
1040
LM123
Description:
The Connor-Winfield LMxxx - Series
155.52
Model LMxxx - Series
MHz
5 x7mm Surface Mount Package
2.5 or 3.3 Vdc Operation
are 5x7mm Surface Mount, LVDS, Fixed
Frequency Crystal Controlled Oscillator
2111 Comprehensive Drive
2111 Comprehensive Drive
LVDS Differential Outputs
(XO). The LMxxx - Series are designed for
applications requiring tight frequency stability,
wide temperature range, and low jitter. Operating
at 2.5 or 3.3 Vdc supply voltage, the LMxxx -
Series provides LVDS Differential Outputs with an
enable / disable function. The design utilizes PLL
multiplication to produce a high frequency output
from a low frequency fundamental crystal.
Frequency Stabilities Available:
+/-20 ppm, +/-25 ppm, +/-50 ppm or +/-100 ppm
Temperature Ranges Available:
0 to 70°C, -40 to 85°C, 0 to 85°C or -20 to 70°C
Low Jitter <1ps RMS
Aurora, Illinois 60505
Aurora, Illinois 60505
Phone: 630-851-4722
Phone: 630-851-4722
Fax: 630-851-5040
Fax: 630-851-5040
Tri-State Enable/Disable on Pad 1
Tape and Reel Packaging
www.conwin.com
www.conwin.com
RoHS Compliant / Lead Free
US Headquarters:
630-851-4722
Absolute Maximum Ratings
European Headquarters:
+353-61-472221
Parameter
Storage Temperature
Supply Voltage (Vcc)
Minimum
Nominal
Maximum
Units
°C
Vdc
Notes
-55
-
-
125
-0.5
4.6
Input Voltage
-0.5
-
Vcc + 0.5
Vdc
Operating Specifications
Parameter
Minimum
Nominal
Maximum
Units
Notes
Output Frequency (Fo)
Total Frequency Tolerance
Model LMx4x
98
-
670
MHz
1
(See Ordering Information or Model Matrix for full part number)
-20
-25
-
-
-
-
20
25
50
100
ppm
ppm
ppm
ppm
2
2
2
2
Model LMx1x
Model LMx2x
-50
Model LMx3x
-100
Operating Temperature Range (See Ordering Information or Model Matrix for full part number)
Model LM1xx
Model LM2xx
Model LM3xx
Model LM4xx
0
-
-
-
-
70
85
85
70
°C
°C
°C
°C
-40
0
-20
Supply Voltage (Vcc)
Model LMxx2
(See Ordering Information or Model Matrix for full part number)
2.375
3.135
-
2.5
3.3
70
2.625
3.465
75
Vdc
Vdc
mA
Model LMxx3
Supply Current (Icc)
Jitter:
Period Jitter
-
-
3.0
0.6
5.0
1.0
ps RMS
ps RMS
Integrated Phase Jitter
SSB Phase Noise (Fo = 155.52 MHz)
@ 10 Hz offset
-
-
-
-
-
-
-
-40
-75
-95
-110
-115
-60
-
-
-
-
-
-
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc
@ 100 Hz offset
@ 1 KHz offset
@ 10 KHz offset
@ 100 KHz offset
Sub-Harmonics
Start-Up Time
-50
2
ms
Enable / Disable Input Characteristics
Parameter
Minimum
70%Vcc
-
Nominal
Maximum
Units
Vdc
Vdc
Notes
Enable Input Voltage - (High) -(Vih)
Disable Input Voltage - (Low) - (Vil)
-
-
-
3
3
30%Vcc
LVDS Output Characteristics
Parameter
Minimum
Nominal
Maximum
Units
Ohm
mV
Notes
Load
-
-
250
45
-
100
-
50
0.3
-
Output Differential Voltage (Vod)
Duty Cycle at 50% Level
Rise / Fall Time: 20% to 80%
450
55
0.7
4
5
%
ns
Package Characteristics
Hermetically sealed ceramic package and metal cover
Package
Environmental Characteristics
Vibration:
Vibration per Mil Std 883E Method 2007.3 Test Condition A.
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
RoHS compliant lead free. See soldering profile on page 2.
Shock:
Soldering Process;
Bulletin
DS030
1 of 2
Notes:
ꢀ 1.ꢀAllꢀoutputꢀfrequenciesꢀmayꢀnotꢀbeꢀavailable,ꢀpleaseꢀcontactꢀtheꢀfactoryꢀwithꢀyourꢀoutputꢀfrequencyꢀrequirements.
ꢀ 2.ꢀIncludesꢀcalibrationꢀ@ꢀ25°C,ꢀfrequencyꢀstabilityꢀvs.ꢀchangeꢀinꢀtemperature,ꢀsupplyꢀvoltageꢀandꢀloadꢀvariations,ꢀshockꢀandꢀvibrationꢀandꢀ20ꢀyearsꢀaging.ꢀ
ꢀ 3.ꢀWhenꢀtheꢀoscillatorꢀisꢀdisabledꢀtheꢀoutputsꢀareꢀatꢀhighꢀimpedance.ꢀOutputsꢀareꢀenabledꢀwithꢀnoꢀconnectionꢀonꢀE/Dꢀpadꢀ1.
ꢀ 4.ꢀVodꢀmeasuredꢀwithꢀaꢀ100ꢀohmꢀresistorꢀbetweenꢀtheꢀtrueꢀoutputꢀandꢀtheꢀcomplementaryꢀoutput.
ꢀꢀ 5.ꢀDutyꢀcycleꢀmeasuredꢀatꢀ50%ꢀofꢀoutputꢀvoltageꢀswing.
Page
Revision
00
Date
05 Oct 2010
Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation