LM2772
www.ti.com
SNVS486B –DECEMBER 2006–REVISED MAY 2013
LM2772 Low-Ripple Switched Capacitor Step-Down Regulator
Check for Samples: LM2772
1
FEATURES
DESCRIPTION
The LM2772 is a switched capacitor step-down
regulator that produces a 1.2V output. It is capable of
supplying loads up to 150mA with 3% output voltage
regulation over line, load, and temperature. The
LM2772 operates with an input voltage from 3.0V to
5.5V, accommodating 1-cell Li-Ion batteries and
chargers.
2
•
•
•
•
•
•
•
•
•
•
•
•
Low-Noise Fixed Frequency Operation
1.2V Output Voltage
3% Output Voltage Regulation
Li-Ion (3.6V) to 1.2V with 80% Efficiency
Very Low Output Ripple: 8mV @ 150mA
Output Currents up to 150mA
The LM2772 utilizes a highly efficient regulated multi-
gain charge pump. Pre-regulated 1.1MHz fixed-
frequency switching results in very low ripple and
noise on both the input and the output. When output
currents are low, the part automatically switches to a
low-ripple PFM regulation mode to maintain high
efficiency over the entire load range.
2.7V to 5.5V Input Voltage Range
Shutdown Disconnects Load from VIN
1.1MHz Switching Frequency
No Inductors…Small Solution Size
Short Circuit and Thermal Protection
WSON-10 Package (3mm × 3mm × 0.8mm)
The LM2772 is available in TI’s WSON-10 Package
(WSON-10).
APPLICATIONS
•
DSP, Memory, and Microprocessor Power
Supplies
•
•
Mobile Phones and Pagers
Portable Electronic Devices
Typical Application Circuit
V
: 1.2V
OUT
V
IN
= 3.0V to 5.5V
I
up to 150 mA
OUT
V
V
OUT
IN
C
IN
C
OUT
1 µF
4.7 µF
C1+
GND
C1
1 µF
LM2772
High: ON
Low: Shutdown
C1-
C2+
EN
C3+
C3
1 µF
C2
1 µF
C3-
C2-
Capacitors: 1 µF - TDK C1005X5R0J105K
4.7 µF - TDK C1608X5R0J475K
or equivalent
Figure 1.
Figure 2. LM2772 Efficiency vs.
Low-Dropout Linear Regulator (LDO) Efficiency
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated